Introduction: The HK-1501 mobile calibration monitoring platform is a mobile online multi-parameter water quality detection device launched by the company, which can complete the dynamic online measurement of the (hydrogen/ratio) conductivity meter, pH meter, sodium meter, and dissolved oxygen meter at the same time A series of tasks such as inspections, inspections, etc., can be widely used in research institutes, universities and colleges and other research departments, and can also be used in fields such as electric power, petrochemical, environmental protection, and scientific research. The device has obtained a utility model patent (ZL 2017 2 1740142.7) and a structural appearance patent (ZL 2018 3 0544344.8). Features: 1. One-piece stainless steel box structure, unique appearance design, beautiful and firm; 2. The flow path system is independent of each other without interference, with high reliability and accuracy; 3. It is powered by lead-acid batteries, with strong endurance and mobility, which is convenient for on-site use; 4. There is no need to dismantle the instrument during inspection, and the inspection is accurate, fast and simple; 5. Adopting touch screen display and operation, providing excellent device control functions and realizing a good man-machine interface, in line with operating habits; 6. Adopt integrated bus communication smart conductivity sensor, with strong anti-interference ability and more accurate measurement; 7. Collect 5 kinds of measurement parameters, analyze data comprehensively and save measurement time; 8. Data storage and export function, convenient for data recording; 9. Data input, analysis and judgment functions, intelligent data processing; 10. Pre-installed WIFI interface, USB interface, TF card slot, can realize data transmission and software upgrade; Technical parameter: Measurement parameters: dissolved oxygen; Ph; conductivity; sodium ion Electrode type: composite dissolved oxygen electrode; composite pH electrode; calculation type pH; intelligent composite conductivity electrode Measurement, reference, temperature electrode Temperature sensor: NTC30K; PT1000 Measuring range: Dissolved oxygen: (0-20) μg/L, (0-200) μg/L, (0-20) mg/L automatic switching PH:(0.00～14.00)pH Conductivity: K=0.01, (0.000～200.0)μS/cm K=0.1, (0.000～2000.0)μS/cm Sodium ion: 0.23μg/L-2.30g/L automatic switching Temperature measurement: (0.0～99.9)℃ Temperature compensation: Dissolved oxygen: (0.1～50.0)℃ (Ph; conductivity; sodium ion): 0.1～60.0℃ Minimum resolution: Dissolved oxygen: 0.1μg/L pH: 0.01pH Conductivity: 0.001μS/cm Sodium ion: 0.01μg/L
Environment temperature: (5～45)℃ Relative humidity: ≤95%RH (no condensation) Storage and transportation temperature: (-20-55)℃ (not including electrode, electrode should be higher than 0℃) Water sample temperature: (5～50)℃ Water sample pressure: ≤0.3MPa Water sample flow: (50～300) mL/min
Solid particles: less than 5μm in diameter, no colloidal matter, no grease Power requirements: AC (100～240)V, (50～60)Hz, lead-acid rechargeable battery power supply Appearance size: 1263mm*510mm*380mm (height*width*thickness) Buttons and display: 7-inch touch screen display operation Weight: 55kg
Introduction: The HK-1501 mobile calibration monitoring platform is a mobile online multi-parameter water quality detection device launched by the company, which can complete the dynamic online measurement of the (hydrogen/ratio) conductivity meter, pH meter, sodium meter, and dissolved oxygen meter at the same time A series of tasks such as inspections, inspections, etc., can be widely used in research institutes, universities and colleges and other research departments, and can also be used in fields such as electric power, petrochemical, environmental protection, and scientific research. The device has obtained a utility model patent (ZL 2017 2 1740142.7) and a structural appearance patent (ZL 2018 3 0544344.8).
