HDDL-315 single arm drop tester Introduction: The one-arm drop tester mainly meets the ability of the product packaging under transportation conditions to improve and perfect the packaging design. The drop test machine adopts single column direction, spring buffer and height scale indication, and the work is stable and reliable. It can realize edge, surface and corner drop, and meets the applicable objects of GB/T4857.5-92 and ISO2248-1972(E). Electronic product packaging dropped; Plastic product packaging fell; Toy product packaging dropped; Other finished packaging drops, etc. Features: 1. This machine can test the surface, angle and edge of the package freely. 2. Display height indicator and decoder for high tracking, which can be accurate 3. The height of the product is given, and the error from the preset drop height does not exceed 2% or 10mm. This machine adopts single-arm and double-column structure. 4. It has electric reset, electric control drop and electric lifting device, which is easy to use. The unique hydraulic buffer device greatly improves the service life, stability and safety of the machine. Single arm setting, easy to place the product, drop angle impact surface and bottom plate 6. Plane angle error is less than or equal to 5o. 7. This test machine is only suitable for three-phase four-wire 380V AC power supply. Technical Parameters: Indicator / Model: HDDL-315/HDDL-320 Drop height (mm): 300-1500/300-2000 Maximum weight of test piece (kg): about 60 The largest size of the test piece (mm): 800 × 1000 × 800 Impact panel size (mm): 1400 × 1200 Height adjustment: motor drive Test bench dimensions (mm): about 1400 × 1200 × 2300 Net weight (kg): about 500 The test system meets the specifications: ISO22488-1972(E)
Introduction: The one-arm drop tester mainly meets the ability of the product packaging under transportation conditions to improve and perfect the packaging design. The drop test machine adopts single column direction, spring buffer and height scale indication, and the work is stable and reliable. It can realize edge, surface and corner drop, and meets the applicable objects of GB/T4857.5-92 and ISO2248-1972(E). Electronic product packaging dropped; Plastic product packaging fell; Toy product packaging dropped; Other finished packaging drops, etc.
