Introduction: Packaging Carton Drop Tester Mono-Wing Drop Tester The single-arm drop tester is designed to test the damage to the product package from crashes and evaluate the impact resistance during transport handling. Wing drop test machine for the package surface, angle, edge for free drop test, equipped with digital display and height meter with a tracker, which can accurately give the product drop height, and the default drop height The error does not exceed 2% or 10mm. The machine adopts single-arm double-column structure, with electric reset, electronic control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, smoothness and safety of the machine, single arm set, easy Place the product, drop angle impact surface and floor plane angle error is less than or equal to 5 °. Drop test machine for the product after the simulation of different edge, angle, surface at different heights on the ground when the situation, so as to understand the product damage and product packaging components in the drop when the test can withstand the fall height and impact resistance strength. According to the actual situation of products and national standards within the scope of improvement, improve packaging design Standards compliant: ISO 2248, JIS Z0202-87, GB / T4857.5-92 Specifications: Model: FLR-004 single wing drop test machine Drop height: 300-1500mm adjustable Specimen weight: 0-80Kg Floor thickness: 10mm Specimen size: 800 x 800 x1000mm Impact panel size: 1700 x 1200mm Drop height error: ± 10mm Dimensions: about 1700 x 1200 x 2315mm Product weight: about 300kg Test methods: surface, angle, edge drop in all directions Control method: electric Height error: 1% Panel parallel error: ≤ 1 degree Power: AC380V 50HZ 1.85KWA
Introduction: Packaging Carton Drop Tester Mono-Wing Drop Tester The single-arm drop tester is designed to test the damage to the product package from crashes and evaluate the impact resistance during transport handling. Wing drop test machine for the package surface, angle, edge for free drop test, equipped with digital display and height meter with a tracker, which can accurately give the product drop height, and the default drop height The error does not exceed 2% or 10mm. The machine adopts single-arm double-column structure, with electric reset, electronic control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, smoothness and safety of the machine, single arm set, easy Place the product, drop angle impact surface and floor plane angle error is less than or equal to 5 °. Drop test machine for the product after the simulation of different edge, angle, surface at different heights on the ground when the situation, so as to understand the product damage and product packaging components in the drop when the test can withstand the fall height and impact resistance strength. According to the actual situation of products and national standards within the scope of improvement, improve packaging design
