HD-A520 single wing drop test machine Introduction: It can test the surface, angle and edge of the package freely. It is equipped with a digital display height indicator and a high tracking with a decoder, so that the product drop height can be accurately given, and the preset drop height error does not exceed 2%. Or 10mm. This machine adopts single-arm and double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of one-arm setting, which is convenient Place the product, the angle between the angle of impact of the drop angle and the plane of the bottom plate is less than or equal to 5°. Single wing drop tester meets standards Meet ISO2248, JIS Z0202-87, GB/T4857.5, ASTM D5276, ASTM D5487, ISTA Single wing drop tester product application After the product is packaged, it simulates the different edges, corners and faces at different heights and falls on the ground to understand the damage of the product and evaluate the fall height and impact strength of the product packaging components when they fall. Therefore, according to the actual situation of the product and the national standards, improve and improve the packaging design. Technical Parameters: Falling floor: iron plate Drop height: 300~1500 Measuring weight: 65KG Specimen size: 800*800*800 Impact panel: 1700*1200mm Arm size: 160*180*8 Drop error: <2° Drop height error: ±10mm Dimensions: 1700*1200*2300mm Weight: 600kg Power: AC380V\50HZ\5A Power: 1.5KW
Introduction: It can test the surface, angle and edge of the package freely. It is equipped with a digital display height indicator and a high tracking with a decoder, so that the product drop height can be accurately given, and the preset drop height error does not exceed 2%. Or 10mm. This machine adopts single-arm and double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of one-arm setting, which is convenient Place the product, the angle between the angle of impact of the drop angle and the plane of the bottom plate is less than or equal to 5°. Single wing drop tester meets standards Meet ISO2248, JIS Z0202-87, GB/T4857.5, ASTM D5276, ASTM D5487, ISTA Single wing drop tester product application After the product is packaged, it simulates the different edges, corners and faces at different heights and falls on the ground to understand the damage of the product and evaluate the fall height and impact strength of the product packaging components when they fall. Therefore, according to the actual situation of the product and the national standards, improve and improve the packaging design.
