HD-A520-1 packaging box double wing drop test machine Introduction: It can test the surface, angle and edge of the package freely. It is equipped with a digital display height indicator and a high tracking with a decoder, so that the product drop height can be accurately given, and the preset drop height error does not exceed 2%. Or 10mm. This machine adopts double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of the machine, which can conveniently place the product and drop The angular impact angle between the angle impact surface and the bottom plate plane is less than or equal to 5°. Wing drop test machine meets the standard Meet ISO2248, JIS Z0202-87, GB/T4857.5, ASTM D5276, ASTM D5487, ISTA Wing drop tester product application The drop test machine is used to simulate the different edges, angles and faces of the product when it is dropped on the ground, so as to understand the damage of the product and evaluate the fall height and impact resistance of the product packaging components when falling. strength. Therefore, according to the actual situation of the product and the national standards, improve and improve the packaging design. Technical Parameters: Falling floor: cement board Drop height: 400~1500 Measuring weight: 65KG Specimen size: 800*800*800 Impact panel: 1400*1200mm Arm size: 700*350 Drop error: <2° Drop height error: ±10mm Dimensions: 1400*1200*2200mm Weight: 600kg Power: AC380V\50HZ\5A Horsepower: Increase 1/3 HP
Introduction: It can test the surface, angle and edge of the package freely. It is equipped with a digital display height indicator and a high tracking with a decoder, so that the product drop height can be accurately given, and the preset drop height error does not exceed 2%. Or 10mm. This machine adopts double-column structure, with electric reset, electric control drop and electric lifting device: easy to use; unique hydraulic buffer device greatly improves the service life, stability and safety of the machine, which can conveniently place the product and drop The angular impact angle between the angle impact surface and the bottom plate plane is less than or equal to 5°. Wing drop test machine meets the standard
