Unique characteristics: 1. It can be made into two kinds of length gel sizes: 83 × 97mm extended type and 83 × 73mm miniature. The extended gel is suitable for the separation of small molecular weight fragments of nucleic acid by SSCP EMSA with high detection sensitivity. 2. The advantages of in-situ gumming are as follows: the oblique cam gumming device can be used to finish the gelling on the electrophoretic core, and after the gel is made, there is no need to move the glass plate, thus avoiding the mistakes that may be caused by the moving. 3. Electrophoretic comb 1. 0 mm thick, 1. 0 ~ 10 ~ 15 ~ (18) teeth (0. 75 mm thick). 15 teeth of 1.5mm; 4. There is 1cm space in the bottom of the tank, magnetic rod can be placed to stir, so that the buffer temperature and ionic strength are uniform, the electrophoretic results are more accurate. 5. The glass plate is grinded on four sides with circular grinding at the concave. 6. Special electrophoretic comb does not inhibit gel polymerization and can avoid contact with air to ensure homogeneity of polymerization. 7. Guide the way of sample, avoid omission or repeat on the sample; 8. The cathode structure of the electrode is V-shaped, and there are bubble outlet holes on both sides of the electrode, and there will not be any bubbles in electrophoresis, which ensures the full contact between the electrode and the buffer solution. 9. Excellent heat dissipation effect, support 300V rapid electrophoresis, not only to avoid the user self-made "ice basin" cooling embarrassment, but also to avoid the gel spectrum band "smiling face" phenomenon; 10. Rugged, coarse-grained platinum (0# 0.25mm) 11. Equipped with liquid reducing plate, the volume of buffer can be adjusted according to the need of experiment. 12. Equipped with multi-function pry glue ruler.
Unique characteristics: 1. It can be made into two kinds of length gel sizes: 83 × 97mm extended type and 83 × 73mm miniature. The extended gel is suitable for the separation of small molecular weight fragments of nucleic acid by SSCP EMSA with high detection sensitivity. 2. The advantages of in-situ gumming are as follows: the oblique cam gumming device can be used to finish the gelling on the electrophoretic core, and after the gel is made, there is no need to move the glass plate, thus avoiding the mistakes that may be caused by the moving. 3. Electrophoretic comb 1. 0 mm thick, 1. 0 ~ 10 ~ 15 ~ (18) teeth (0. 75 mm thick). 15 teeth of 1.5mm; 4. There is 1cm space in the bottom of the tank, magnetic rod can be placed to stir, so that the buffer temperature and ionic strength are uniform, the electrophoretic results are more accurate. 5. The glass plate is grinded on four sides with circular grinding at the concave. 6. Special electrophoretic comb does not inhibit gel polymerization and can avoid contact with air to ensure homogeneity of polymerization. 7. Guide the way of sample, avoid omission or repeat on the sample; 8. The cathode structure of the electrode is V-shaped, and there are bubble outlet holes on both sides of the electrode, and there will not be any bubbles in electrophoresis, which ensures the full contact between the electrode and the buffer solution. 9. Excellent heat dissipation effect, support 300V rapid electrophoresis, not only to avoid the user self-made "ice basin" cooling embarrassment, but also to avoid the gel spectrum band "smiling face" phenomenon; 10. Rugged, coarse-grained platinum (0# 0.25mm) 11. Equipped with liquid reducing plate, the volume of buffer can be adjusted according to the need of experiment. 12. Equipped with multi-function pry glue ruler.
