Brief introduction: The JH-KYJ-AF type flat compression strength tester is used for the compressive strength test of honeycomb paperboard. The detection of the strength and deformation of industrial paperboard, chemical fiber paper tube, small package box and other small containers is an ideal testing equipment for production enterprises, quality inspection institutions and other departments. Executive standard: GB/T 27591< >BB/T0023-2004< >BB/T 0032-2006< paper bowl edgeboard paper tube >BB/T 0016-2006< honeycomb paperboard packaging materials > Characteristic： The machine is induced by a high precision sensor and is analyzed by software to display the strength of the sample. Product use: 1 ring pressure is used for corrugated paper and kraft paper with thickness below 1mm. Sample 152X12.7mm is placed in a circular container to test the compressive strength of its vertical direction. The 2 side pressure is used for corrugated paper with a thickness below 8mm. The sample 100X25mm is placed under the 100X100mm pressure plate and fixed by two blocks. The vertical compressive strength of the vertical direction is checked by this machine. 3 can be used with various accessories and can be used to test the adhesive strength and flat pressure strength of cardboard. Technical parameters: The indication error: + 1%; The variability of the indication value: < 1%; Resolution: 0.1 N; Measurement range: (0~5000) N; Deformation error: less than 1 mm; Plate area: 300 x 300 mm; Parallel plate: less than 1 mm; Work travel: (5~300) mm; Sample length: 300mm; The speed of longitudinal compression test: (10 + 2) mm/min; The speed of transverse bending test: (100 + 10) mm/min; Unit conversion: three unit conversion of Kg/N/Lb (kg / Newton / pound) Decomposition degree: 1/10000 Test rate: 100mm/min + 2mm/min Accuracy: + 1% Press plate: 100X100mm or 350X350mm (also depending on the diameter of the visual compression specimen) Ring pressure sample: 152 X12.7mm Side pressure sample: 100 X25mm Volume: host 55X40X85cm Weight: host 65kg Power: AC 220V, 1.5A
Brief introduction: The JH-KYJ-AF type flat compression strength tester is used for the compressive strength test of honeycomb paperboard. The detection of the strength and deformation of industrial paperboard, chemical fiber paper tube, small package box and other small containers is an ideal testing equipment for production enterprises, quality inspection institutions and other departments. Executive standard: GB/T 27591< >BB/T0023-2004< >BB/T 0032-2006< paper bowl edgeboard paper tube >BB/T 0016-2006< honeycomb paperboard packaging materials > Characteristic： The machine is induced by a high precision sensor and is analyzed by software to display the strength of the sample.
