GIV-2A Solar Module Tester Introduction: GIV-2A solar module tester is a technology-leading international side-lighting simulator newly developed by our company. This product solves the problem of insufficient spectral matching in the 300nm-400nm band of pulse simulator, and the main performance of the simulator is excellent. In international standards, the indicators are 2 times better than the international standard (IEC60904-9). The internal positioning of this simulator is A+A+A+. This simulator is not only used for component production, but also for research institutes and institutions with higher equipment performance requirements. Test object: The GIV-2A solar module tester is a solar crystal silicon component. The components are transmitted online to the simulator, and the manual wiring test is performed by a robot. Technical Parameters: Model: GIV-2A Maximum measurable component size: 2000x2000mm Light source: imported pulse xenon lamp Lamp life: 10,000 times Amplitude range: 700-1200W/m2 Spectral matching: 0.875-1.125 (A+ level) Amplitude illuminance instability: <1% (A+ level) Amplitude unevenness: <1% (A+ grade) The same test battery does not repeat 157 points in the effective test area. Repeatability: <1% (40 consecutive tests on the same battery) Measuring gear (customizable): Voltage 1V/10V/50V/100V/200V Current 0.25A/1A/2.5A/10A/20A Test resolution: Voltage: 0.1%, current: 0.1% Working mode: Single flash automatic measurement I-V curve Power requirements: 220V ± 10%, 10A, 50HZ Dimensions: 6000 × 2500 × 2500mm (excluding the darkroom bracket height, that is, the chain height)
Introduction: GIV-2A solar module tester is a technology-leading international side-lighting simulator newly developed by our company. This product solves the problem of insufficient spectral matching in the 300nm-400nm band of pulse simulator, and the main performance of the simulator is excellent. In international standards, the indicators are 2 times better than the international standard (IEC60904-9). The internal positioning of this simulator is A+A+A+. This simulator is not only used for component production, but also for research institutes and institutions with higher equipment performance requirements. Test object: The GIV-2A solar module tester is a solar crystal silicon component. The components are transmitted online to the simulator, and the manual wiring test is performed by a robot.
