Features: 1. Multi-usage, can measure the dust, moisture content, flow velocity, dynamic pressure, static pressure, temperature, smoke lampblack, such as flue gas parameters. 2. Ac/dc, can work in the absence of ac power occasions, working time is more than 8 hours. 3. Equipped with intelligent flue gas preprocessor, make more accurate measurement data, and ensure the instrument more secure. 4. Automatic memory last time input parameter to monitor, the next boot priority to use, a key to realize the sampling. 5. Unique drying, filtration, prevent breath triad drying cylinder design. 6.. Multistage photoelectric isolation, more CPU fault tolerant structure, to overcome the electrostatic interference and electrostatic breakdown. 7. Automatic correction parameters such as temperature and pressure, the standard of data can be read directly. 8. Unique air cooling system, when the temperature is higher than the set temperature automatic open air cooling system, guarantee the normal work of the instrument. 9. Real-time display direct reading dynamic pressure, static pressure, temperature, smoke temperature, flow velocity and flow rate, rotational speed, moisture content and other parameters. 10. Adopt imported pressure sensors and electrochemical sensor measurement results more accurate. 11. Large flow adjustable speed for corrosion resistance of smoke sampling pump and electronic flowmeter, fast response, high tracking efficiency. Technical parameters Sampling flow: (5 ~ 80 L/min Flue gas dynamic pressure: Pa (0 ~ 2000) The flue gas temperature: (0 ~ 500) ℃ can be extended Dry and wet bulb temperature: (0 ~ 100 ℃ Moisture content: (0 ~ 60) % Atmosphere: kPa (70 ~ 130) Uniform: attract velocity (1 ~ 45) m/s Maximum sampling volume: 999999.9 L Excess air coefficient: 0 ~ 99.99 Temperature before: - 30 ~ 99 ℃ Storage capacity: one million sets Constant speed tracking response time: 4 seconds or less Sampling pump load capacity: - 20 kpa for resistance, flow or 50 l/min Flue gas sampling flow: 0.1 L/min ~ 2 L/min, the factory set up 1.5 L/min The service life of the flue gas sensors: in the air about 3 years Working power supply: AC220V plus or minus 10% 50 hz or DC24V (optional)
Features: 1. Multi-usage, can measure the dust, moisture content, flow velocity, dynamic pressure, static pressure, temperature, smoke lampblack, such as flue gas parameters. 2. Ac/dc, can work in the absence of ac power occasions, working time is more than 8 hours. 3. Equipped with intelligent flue gas preprocessor, make more accurate measurement data, and ensure the instrument more secure.
