Introduction: GF-6000 automatic dual-furnace industrial analyzer for the determination of minerals such as coal moisture, ash, volatile and elemental content. For coal, electricity, metallurgy and geological exploration laboratories and other departments. GF-6000 automatic dual furnace industrial analyzer, furnace A can test moisture, ash and volatile, can be used independently, B furnace only a separate test volatiles. The instrument is highly automated, fast, accurate test results. 19 samples can be tested at a time, or project tests can be combined selectively. Test process fast method and the national standard classic two procedures for selection. Features: 1. Convenient and applicable: According to the different requirements of moisture, ash and volatile in the industrial analysis for the experimental environment, two kinds of furnaces are used for testing at the same time. 2. Highly automated: Built-in imported electronic balance, automatic weighing assembly, complete automatic weighing, automatic heating, automatic drying, automatic calculation, automatic printing and other operations. 3. Test accuracy: moisture, ash, volatile test procedures, conditions and results meet the national standard requirements. 4. Test efficiency: Volatile independent experiment design makes the experiment time is greatly shortened, moisture, ash, volatile three laboratory indicators completed in 120 minutes experiment time, greatly reducing the labor intensity of the operator, improve work efficiency, suitable Batch analysis of coal samples. 5. Modular import balance, integrated thermogravimetric analysis, to ensure accurate weighing test; 6. Adopt the whole imported hearth, heating speed, energy saving, short test time. 7. The whole circuit modular design, effectively reducing the failure rate of the instrument, improve the stability of the whole machine. 8. Unique design of the volatile crucible makes volatile residue can be observed characteristics of coke slag, to avoid a single furnace industrial analyzer can only result, can not observe the characteristics of coke slag defects. Technical Parameters: 1. Adopting the double oven and double balance structure: Separately operated in split mode, one instrument is used to measure the ash content, the other one is used to measure the moisture content and volatility, and the same computer controls the operation of both instruments at the same time 2. Sample quality: moisture, ash samples 0.6 ~ 1.1g (mass adjustable), volatile samples 0.9 ~ 1.1g 3. Furnace temperature range: room temperature ~ 1000 ℃ 4. Test temperature: moisture: 105 ℃, ash: 815 ℃, volatile matter: 900 ℃; 5. Analysis accuracy: to meet the GB / T212 "method of industrial analysis of coal" requirements 6. Weight: A furnace about 95kg, B furnace about 90kg 7. Gas requirements: oxygen: 99.5% purity, pressure after decompression 0.1MPa 8. Gas requirements: Nitrogen: Purity 99.5%, pressure after decompression 0.1MPa 9. Regulator: high-end 0 ~ 25MPa, low-end 0 ~ 0.4MPa 10. Crucible quantity: 20, can test 19 samples at a time 11. Power: AC220V ± 10%, 50HZ 12. Power: A furnace ≤ 5kw, B furnace ≤ 2kw
Introduction: GF-6000 automatic dual-furnace industrial analyzer for the determination of minerals such as coal moisture, ash, volatile and elemental content. For coal, electricity, metallurgy and geological exploration laboratories and other departments. GF-6000 automatic dual furnace industrial analyzer, furnace A can test moisture, ash and volatile, can be used independently, B furnace only a separate test volatiles. The instrument is highly automated, fast, accurate test results. 19 samples can be tested at a time, or project tests can be combined selectively. Test process fast method and the national standard classic two procedures for selection.
