GCZG-II DC High Voltage Generator Introduction: The GCZG-II DC High Voltage Generator (Integrated) adopts an aluminum alloy chassis, an intermediate frequency voltage doubling circuit, PWM pulse width modulation technology, and high-power IGBT devices. It has a full range of smooth voltage regulation, a zero start voltage boost potentiometer, and a 0.75UDC1mA function button, which is convenient for zinc oxide lightning arrester testing. The GCZG-II DC High Voltage Generator (Integrated) overvoltage protection adopts a pull-out code setting, which is clear at a glance. The voltage doubling is made of new materials, lightweight and lightweight Strong. Coated with special insulation materials on the surface, with good electrical performance and strong moisture-proof ability Features: 1. The chassis is made of aluminum alloy 2. Adopting an intermediate frequency voltage doubling circuit, applying PWM pulse width modulation technology and high-power IGBT devices 3. Full range smooth voltage regulation 4. Boost potentiometer from zero 5. 0.75UDC1mA function button for convenient testing of zinc oxide lightning arrester 6. Overvoltage protection adopts unplugged setting, which is clear at a glance 7. The double pressure adopts new materials, which are lightweight and sturdy. The exterior is coated with special insulation materials, with good electrical performance and strong moisture resistance. 8. The ZGF product meets the technical requirements of DL/T848.1-2004 Technical parameters: Specification: 60/2 Rated voltage (kV): 60 Rated current (mA): 2 Rated power (W): 120 Chassis weight (kg): 8 Double pressure weight (kg): 4 Double pressure height (mm): 440 Voltage measurement accuracy: Digital display meter ± (1.5% reading ± 2 words) Current measurement accuracy: Digital display meter ± (1.5% reading ± 2 words) Ripple coefficient: ≤ 3% Voltage stability: Random fluctuation, ≤ 1% when the power supply voltage changes by ± 10% Overload capacity: The no-load voltage can exceed 10% of the rated voltage for 10 minutes of use The high charging current is 1.25 times the rated current Power supply: single-phase AC 50HZ 220V ± 10% Working method: intermittent use Continuous time z for 10 minutes at a time Working environment: Temperature: 0-40 ℃ Relative humidity: not more than 85% at room temperature of 25 ℃ (without condensation) Altitude: below 1500 meters Structural features: epoxy fiberglass electrical insulation double pressure cylinder Air insulation, no leakage concerns
Introduction: The GCZG-II DC High Voltage Generator (Integrated) adopts an aluminum alloy chassis, an intermediate frequency voltage doubling circuit, PWM pulse width modulation technology, and high-power IGBT devices. It has a full range of smooth voltage regulation, a zero start voltage boost potentiometer, and a 0.75UDC1mA function button, which is convenient for zinc oxide lightning arrester testing. The GCZG-II DC High Voltage Generator (Integrated) overvoltage protection adopts a pull-out code setting, which is clear at a glance. The voltage doubling is made of new materials, lightweight and lightweight Strong. Coated with special insulation materials on the surface, with good electrical performance and strong moisture-proof ability
