Introduction: The G-5L bauxite analyzer is specially developed for domestic bauxite. It has a fast analysis speed. It can analyze the aluminum-silicon ratio and iron content in 10 bauxite samples in 60 minutes. The analysis speed is faster than the traditional titration method for measuring aluminum, and it overcomes the disadvantages of the traditional gravimetric method for measuring silicon with slow speed and low accuracy. The traditional titration method has the disadvantage of large errors in measuring low-content iron. The bauxite detector is cheap to use and simple to operate. At present, the instrument has been widely used in major factories and private laboratories in Guizhou, Henan, and Shanxi's major aluminum-producing areas. A single bauxite analyzer can test more than 100 samples in one day. The operation is simple, and the test accuracy can reach 0.001, which is well received by users. Technical Parameters: 1. Measurable elements and scope: Element name: Measuring range SiO2 (silicon): 0.01～99.9% K2O (potassium): 0.01～15% Al2O3 (aluminum): 0.01～99.9% Na2O (sodium): 0.01～15% Element name: Measuring range Fe2O3 (iron): 0.01～60% CaO (calcium): 0.01～60% Element name: Measuring range TiO2 (titanium): 0.01～60% MgO (magnesium): 0.01～80% If there are special needs, the lower limit of the content of some element components can be extended to 0.001%. 2. Types of measurable substances Silicon and aluminate: Bauxite/bauxite, refractory raw materials and finished products, and other inorganic non-metallic materials, etc. 3. Sampling channels: 3 4. Measurement channels: 3 channels. 5. Measurement stability: Measure the reading change within 5 minutes ± 2 words. 6. Test repeatability: the same sample solution is tested for 20 times and its reading ±1 pass rate is 99.9999% 7. Detection speed: It can complete the determination of SiO2, Al2O3, Fe2O3 in 10 conventional samples in about 1 hour from the start of weighing. The determination of other elements can be completed within 1 hour. 8. Number of samples for continuous measurement: 10 pieces. 9. Specially develop analysis software with independent intellectual property rights, standard WINDOWS style, beautiful interface, powerful function, simple and convenient operation. All switches and knobs on the analyzer are cancelled, and all functions are realized by software, with automatic zero adjustment and automatic adjustment correction. Fundamentally, the occurrence of mechanical failures is avoided, the stability of the instrument is greatly improved, and the operation is simpler. Basically, zero failure and zero maintenance can be achieved. Electric sample suction is the first in China.
Introduction: The G-5L bauxite analyzer is specially developed for domestic bauxite. It has a fast analysis speed. It can analyze the aluminum-silicon ratio and iron content in 10 bauxite samples in 60 minutes. The analysis speed is faster than the traditional titration method for measuring aluminum, and it overcomes the disadvantages of the traditional gravimetric method for measuring silicon with slow speed and low accuracy. The traditional titration method has the disadvantage of large errors in measuring low-content iron. The bauxite detector is cheap to use and simple to operate. At present, the instrument has been widely used in major factories and private laboratories in Guizhou, Henan, and Shanxi's major aluminum-producing areas. A single bauxite analyzer can test more than 100 samples in one day. The operation is simple, and the test accuracy can reach 0.001, which is well received by users.
