Introduction: There are three methods in the industry for the drying of compressed air: 1) dehydration drying is carried out by using adsorbent to selectively adsorb water vapor in compressed air. Such as adsorption-type compressed air dryer. 2) the use of certain chemical substances deliquescence characteristics of dehydration drying. Such as deliquescent compressed air dryer. 3) the use of compressed air in the water vapor pressure from the compressed air temperature determines the characteristics of the temperature dehydration drying. Such as refrigerated compressed air dryer. In the above three kinds of compressed air drying equipment, the delamination of compressed air dryer has been basically eliminated; and cold and dry air compressor and adsorption air dryer (hereinafter referred to as "dryer") is being widely used. Features: 1 inlet temperature is high Designed for high temperature and humidity areas and the environment, the installation of a unique rear cooler and pre-cooler, you can directly into the high temperature below 80 ℃ gas. 2 has a strong ability to freeze The cooling power is large, can adapt to the larger load changes, the compressed air cooled by the rear cooler and then into the pre-cooler before cooling into the evaporator for cooling, dew point stability, to ensure that more than 99.9% of the gaseous water into liquid water The 3 good materials Refrigerant Compressor: US "Taikang" Cooling fan: Germany "ebm" Automatic drain: Japan's "SMC" Electronic control components: France's "Schneider" 4 Low operating costs Less power consumption, only the matching air compressor power consumption of less than 1/30, automatic drainage, no need to wait. Maintenance, maintenance is simple and convenient, excellent water removal effect. 5 scientific and rational design Surrounded by a ventilation mesh, with a good cooling effect, to ensure long-term continuous normal operation of the machine; Design a unique water vapor separation device, the compressed air and water effectively separated, and through the automatic drainage of water to exclude.
Introduction: There are three methods in the industry for the drying of compressed air: 1) dehydration drying is carried out by using adsorbent to selectively adsorb water vapor in compressed air. Such as adsorption-type compressed air dryer. 2) the use of certain chemical substances deliquescence characteristics of dehydration drying. Such as deliquescent compressed air dryer. 3) the use of compressed air in the water vapor pressure from the compressed air temperature determines the characteristics of the temperature dehydration drying. Such as refrigerated compressed air dryer. In the above three kinds of compressed air drying equipment, the delamination of compressed air dryer has been basically eliminated; and cold and dry air compressor and adsorption air dryer (hereinafter referred to as "dryer") is being widely used.
