Introduction: FT-102D powder character analyzer provides a good solution for the measurement of powder properties; to solve the powder density measurement, material flow and affect the material flow analysis data can be obtained; perfect automated control system, cost Less manual processing and high-precision chip data acquisition; fast access to test data, time-saving, accurate and reliable; and equipped with multi-standard convertible funnel to meet the requirements of different density test on the funnel, Compaction and realistic data can be used to obtain tap density data, using Hausner Ratio Hausnerby and Compressibility Index to evaluate the fluidity of the powder. It can also be determined by the angle of repose or the angle of repose, the mass method and the volumetric method The powder flow rate data were obtained to evaluate the characterization characteristics of powder traits. FT-102D powder properties tester This product is widely used in production, quality inspection, scientific research institutes and colleges and universities laboratory analysis and measurement of materials used. FT-102D powder character measuring instrument The instrument meets the national standard, European and American standard test specifications, widely used in chemical, petroleum, pharmaceutical, pharmaceutical, paint, battery materials, ceramics, non-metallic powder materials, metal oxide powder, Powder metallurgy, plastics, building materials, soil, dyes, abrasives, food additives, catalysts and other related industries. Technical Parameters: 1. Funnel: composed of a number of convertible funnel made of cylindrical cylinder, made of stainless steel, and has enough wall thickness, hardness, smooth, to prevent deformation and excessive wear. Can be obtained bulk density, apparent density, bulk density, loose density and other loose density values. Can be converted into funnel diameter mm: 2.5; 4.0; 5.0; 6.0; 7.0; 8.0; 9.0; 10; 14; 15; 16; 17; 18; 25 (available according to user requirements) 3. Time range: 0-99999S arbitrary set, by the LCD display, digital key set. 4. Weighing range: 0-2000g; precision 0.1g. 5. Funnel volume: 200ml. 6. With the receiving container volume of 25ml, 100ml, 200ml, 250ml, 500ml (according to user needs matching). 7. Tap density: Set the vibration frequency and amplitude as well as the number of vibrations or the time to obtain the data. 8. Sabbath angle (angle of repose): automatic access to angle data, without manual calculation and manipulation. 9. Flow rate test: the volume method and the fixed mass method to obtain quality and time, volume and time relationship. 10. Display: LCD display, digital key control 11. Flow index: no manual calculation, when the required data is obtained, the automatic conversion index data. 12. Optional: Use the companion software to connect the computer to obtain test process data, including analysis of process charts, curves and test reports. 13. Configure the printer to automatically print all test data 14. Input: 220V ± 10% at room temperature
Introduction: FT-102D powder character analyzer provides a good solution for the measurement of powder properties; to solve the powder density measurement, material flow and affect the material flow analysis data can be obtained; perfect automated control system, cost Less manual processing and high-precision chip data acquisition; fast access to test data, time-saving, accurate and reliable; and equipped with multi-standard convertible funnel to meet the requirements of different density test on the funnel, Compaction and realistic data can be used to obtain tap density data, using Hausner Ratio Hausnerby and Compressibility Index to evaluate the fluidity of the powder. It can also be determined by the angle of repose or the angle of repose, the mass method and the volumetric method The powder flow rate data were obtained to evaluate the characterization characteristics of powder traits. FT-102D powder properties tester This product is widely used in production, quality inspection, scientific research institutes and colleges and universities laboratory analysis and measurement of materials used. FT-102D powder character measuring instrument The instrument meets the national standard, European and American standard test specifications, widely used in chemical, petroleum, pharmaceutical, pharmaceutical, paint, battery materials, ceramics, non-metallic powder materials, metal oxide powder, Powder metallurgy, plastics, building materials, soil, dyes, abrasives, food additives, catalysts and other related industries.
