FlowMem-0021-HP triple high pressure flat membrane test equipment Introduction: The device is a high pressure organic membrane cross-flow filtration integrated device. It can be equipped with microfiltration, ultrafiltration, nanofiltration, reverse osmosis, seawater brackish water desalination membranes, and different separation requirements can be achieved by replacing different membranes. It is especially suitable for diaphragm research and testing, small amount of liquid filtration and teaching demonstration. It is widely used in water treatment research, cell collection, drug separation, food and beverage clarification, purification, concentration applications and membrane material research and development. Features: 1. Strong feeding unit. The imported plunger diaphragm pump has the advantages of high pressure, high efficiency, low energy consumption, corrosion resistance, etc. It is an important guarantee for stable operation of the system. 2. Safe and secure design. The system is equipped with a safety relief valve, which automatically depressurizes when the pressure exceeds the limit pressure; the energy storage shock absorber avoids pressure fluctuations and the fluid operation is more stable; the pump motor frequency conversion control realizes flexible start and flexible shutdown, avoiding pressure on the membrane element and system Impact; pressure piping and joints are made of high pressure 316 stainless steel and accessories, high pressure, corrosion resistance, good sealing and durability. 3. Flexible testing methods. Three membrane modules are designed in series, three components can be used at the same time, or one or two components can be used arbitrarily; three membrane cells can be installed with the same membrane, or different membranes can be installed and filtered at the same time; greatly improving testing and research effectiveness. 4. Convenient operation design. The equipment is designed according to ergonomics, easy to operate and operate; compact structure can be placed on the test bench, small operation volume, all stainless steel, closed chassis; jacketed circulating barrel design through external cold / heat source to achieve the operating temperature Control, the device is equipped with flow, pressure, temperature gauges to facilitate monitoring of system parameter changes. At the same time, we also included a film master for the customer to cut the diaphragm. 5. Differentiated customization. In addition to this standard model, we can customize different pressure levels, membrane material, number of membrane modules, and membrane size according to customer requirements. Technical Parameters: Product model: FlowMem-0021-HP Number of membrane pools (units): 3 Membrane material: stainless steel Effective membrane area (cm2): 70cm2*3 pieces Filtration pressure (Mpa): 0-7.0 Filtration temperature (°C): 5-55 ° C (diaphragm tolerant) PH range: 2-12 Filtration capacity rate (L/Hr): 0.3-3 (different depending on diaphragm aperture and material properties) With jacketed material tank volume L: 3.0 Minimum circulation volume (ml): 300 Cooling method: jacket heat exchange Pump motor control: Frequency control / 0-50Hz Power / power (V / Kw): 380V / 1.5Kw Host size (cm): 70 × 50 × 50
Introduction: The device is a high pressure organic membrane cross-flow filtration integrated device. It can be equipped with microfiltration, ultrafiltration, nanofiltration, reverse osmosis, seawater brackish water desalination membranes, and different separation requirements can be achieved by replacing different membranes. It is especially suitable for diaphragm research and testing, small amount of liquid filtration and teaching demonstration. It is widely used in water treatment research, cell collection, drug separation, food and beverage clarification, purification, concentration applications and membrane material research and development.
