FlowMem-0021-HP triple high pressure flat membrane test equipment Introduction: The device is suitable for microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane, seawater/brackish water desalination membrane and other membranes; the whole machine functions integration, only need to replace the diaphragm to achieve different separation level requirements. It is especially suitable for diaphragm research and testing, small amount of liquid filtration and teaching demonstration. Features: 1. Three membrane modules are designed in series, three components can be used at the same time, or one or two components can be used arbitrarily; three components can be filtered by the same diaphragm or different membranes; it is very convenient for testing and Study (the pressure difference between the three components before and after the test does not exceed 0.1Mpa). 2. The pressurized power component adopts the imported plunger diaphragm pump, which has the advantages of high pressure, high efficiency, corrosion resistance and strong self-priming ability; the return line and the dialysis pipeline are designed by hose, which is convenient to connect and use; the host adopts 316 Stainless steel pipes and fittings with high pressure, corrosion resistance and good sealing. 3. The overall structure is compact, the operation is simple, the operation volume is small, the main machine is made of stainless steel material; the system is equipped with multiple safety protections to make your operation more safe and secure: safety relief valve can automatically relieve pressure when the pressure is too high; The shock absorber prevents pressure fluctuations and makes the fluid run more smoothly. 4. This system is suitable for flat membrane modules: microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane, seawater/brackish water desalination membrane, etc., especially for membrane research and testing, small amount of liquid filtration and teaching demonstration, etc. Use design. Technical Parameters: Product Type: FlowMem-0021-HP Membrane area (cm2): 210 (70*3) Power / power (V / Kw): 220V / 1.5Kw Minimum circulation volume (ml): 300 System operating pressure (Mpa): ≤6.5 Applicable filtration temperature (°C): 5—50°C Filtration capacity (L/Hr): 0.5-5 Host size (cm): 70 × 50 × 50
Introduction: The device is suitable for microfiltration membrane, ultrafiltration membrane, nanofiltration membrane, reverse osmosis membrane, seawater/brackish water desalination membrane and other membranes; the whole machine functions integration, only need to replace the diaphragm to achieve different separation level requirements. It is especially suitable for diaphragm research and testing, small amount of liquid filtration and teaching demonstration.
