Flidis Pump intelligent liquid dispensing pump Introduction: The FluidisPump intelligent liquid dispensing pump liquid is used for quantitative distribution of various complex liquids such as liquid culture media (such as nutrient broth, buffered peptone water, normal saline, etc.), fluid culture media, diluent, etc., as well as aseptic sampling of liquid samples (such as sampling of barreled water), and flow transmission control. The time interval of distribution can be set, and information such as flow or speed can be displayed at the same time to realize automatic distribution and filling. With the newly developed hand-held dispenser, it conforms to the ergonomic design. It is easier to control the subpackage volume in the subpackage of culture dishes, contact dishes, test tubes, small capacity triangular bottles, etc., to prevent liquid splashing, so that the subpackage of culture media and other liquids is more accurate and efficient. characteristic: 1. The pump head is not in contact with the liquid, and the wet heat sterilizable subpackaging tube is used to ensure that the subpackaging process is free of cross contamination. 2. It is equipped with a hand-held liquid dispenser as a standard to distribute the culture medium more accurately to prevent liquid dripping and splashing. 3. The hand-held liquid distributor and pump head are designed with a buckle type, which can quickly disassemble and install the subpackage pipes of different specifications, and improve the subpackage efficiency. 4. The low pulse stepping motor is used to reduce the error caused by slow start of the motor, and the subpackage accuracy can reach 1%. 5. Low shear force design, subpackaging emulsion, viscosity and liquid with foam, which can also ensure high accuracy. 6. Built in flow correction function and guide, which can self correct the flow. 7. Low noise design, through the intelligent temperature control function, adjust the working voltage of the cooling fan to achieve the mute effect. 8. 10 sets of liquid volume distribution programs are built in, which can also be programmed according to the subpackage volume and subpackage speed. 9. Three working modes: liquid volume distribution, time distribution and copy distribution. 10. 3.5 inch full Chinese touch color LCD screen, simple and easy to use interface. 11. The internal structure adopts double-layer isolation design to prevent dust and moisture. 12. It has positive and negative direction control, start stop control and full speed control. 13. Power failure memory function, even if power failure is misoperated, restart can continue to set the last distribution. 14. Aviation aluminum shell, easy to clean, effectively prevents corrosion of various acids, alkalis and organic solvents. Technical parameters: Flow range 26-815ml/min Flow accuracy: 1% Speed range: 50-260RPM Speed accuracy: 0.2% Speed resolution: 0.1 RPM Time allocation: 0.1-99.9s Working mode: liquid volume distribution, time distribution, copy distribution Direction control: forward and reverse reversible Adjustment mode: touch screen operation, hand-held distributor operation Applicable power supply: AC220V ± 10% 50Hz/60Hz Power consumption:<30W Overall dimension: 306 × one hundred and fifty × 209mm Weight: 5.3Kg Protection grade: IP31
Introduction: The FluidisPump intelligent liquid dispensing pump liquid is used for quantitative distribution of various complex liquids such as liquid culture media (such as nutrient broth, buffered peptone water, normal saline, etc.), fluid culture media, diluent, etc., as well as aseptic sampling of liquid samples (such as sampling of barreled water), and flow transmission control. The time interval of distribution can be set, and information such as flow or speed can be displayed at the same time to realize automatic distribution and filling. With the newly developed hand-held dispenser, it conforms to the ergonomic design. It is easier to control the subpackage volume in the subpackage of culture dishes, contact dishes, test tubes, small capacity triangular bottles, etc., to prevent liquid splashing, so that the subpackage of culture media and other liquids is more accurate and efficient.
