FlexPRESS fully automatic modular hot inlay machine Introduction: FlexPRESS is a modular hot mount machine that can be flexibly combined, consisting of a main unit and mounting units. One main unit can be configured with up to 5 mounting units. Meet the sample embedding needs of different customers. Batch embedding operations can be achieved. characteristic: 1. Modular design, users can freely choose or expand according to their own needs; 2. Sliding cap, the cap can be opened and closed automatically or manually; 3. Configure a 7-inch touch screen and 16 sets of commonly used process parameters; 4. It can be heated at the top and around to achieve rapid and comprehensive improvement of efficiency of the sample; 5. It can be preheated or pressurized, and the heating power (speed) can be adjusted; 6. Optional circulating water tank to achieve multiple cooling methods. Technical parameters: Model: FlexPRESS Host Unit Power supply: 110/220V, 2.0 Kw Heating power: 1.6Kw Sample size: Φ 30mm (standard), Φ 25.4mm, Φ 32mm, Φ 40mm, Φ 50mm (optional) Heating range: 60-250 ℃ Insulation time: 1~60 minutes Pressure range: 0-570 Bar (depending on mold size) Heating location: circular heating around the perimeter and top heating Heating method: Preheat first, then keep warm (or do not preheat) Pressure application method: pre press first, then hold pressure (or not pre press) Cooling method: Automatic mode: by time or by temperature; Manual mode Cooling rate: high, medium, and low cooling rates Control panel: 7-inch touch screen Environmental temperature: -20 ° C -60 ° C Environmental humidity: 0-95% RH Size (length x width x height): 300x561x492 mm Weight: 60 Kg
Introduction: FlexPRESS is a modular hot mount machine that can be flexibly combined, consisting of a main unit and mounting units. One main unit can be configured with up to 5 mounting units. Meet the sample embedding needs of different customers. Batch embedding operations can be achieved.
