Sales FDG2-C-SO2 fixed sulfur dioxide detector，Manufacturer

Position: Home > > Industry specific instrument > Drug testing instrument > Sulfur dioxide detector > FDG2-C-SO2 fixed sulfur dioxide detector

FDG2-C-SO2 fixed sulfur dioxide detector

Product ID：HZYJeyhl013

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

Product Introduction
Consulting

Model NumberFDG2-C-SO2

Brand NameSZSXHRKJ

Payment TermsT/T, paypal

Product description:
The upper computer software, can be connected to the computer real-time monitoring, and record and save, export data
The original imported sensor, two sections of the switch output, can be arbitrarily set alarm value
4 ~ 20mA, RS485 output, can upload DCS or PLC system (optional Modbus ASCII, Modbus RTU protocol)
The alarm signal can be linked fan or solenoid valve, a key to restore factory Settings, switch between Chinese and English
Technical parameters:

Detection principle	Electrochemical detection principle
Measuring range	0-100ppm、200ppm、500ppm、1000ppm、2000ppm、5000ppm
Resolution	0.01ppm(0-100)、1ppm(0-5000)	Gas unit	ppm、mg/m3
Signal output	4-20mA、RS-485、Switching value	Mode of connection	4-20mA (three-wire system, two-wire system) RS-485 (four-wire system)
Precision	≤±3%（F.S）	Repetitiveness	≤±1%
Detection mode	Diffusion type, pump suction type (optional)	Alarm mode	Sound, light alarm (optional)
Installation mode	Wall type, pipe flow type	Zero drift	≤±1%（F.S/ year）
Linear error	≤±1%	Recovery time	≤30 seconds
Response time	≤20 seconds	Levels of protection	IP65
Explosion-proof type	Explosion-proof Exd Ⅱ CT6	Relative humidity	10%～95%RH （non-condensed）
Explosion-proof number	CNEx16.2947X	Service voltage	DC 24V
Working temperature	-20℃～+70℃	Sensor life	More than two years
Transmission distance	≤2000m	Cable selection	Rvv 0.75 shielded cable
Pressure limitation	86-106 KPa	Maximum power dissipation	2.5W
Size	23018090(mm)	Weight	1.2kg

Product description:
The upper computer software, can be connected to the computer real-time monitoring, and record and save, export data
The original imported sensor, two sections of the switch output, can be arbitrarily set alarm value
4 ~ 20mA, RS485 output, can upload DCS or PLC system (optional Modbus ASCII, Modbus RTU protocol)
The alarm signal can be linked fan or solenoid valve, a key to restore factory Settings, switch between Chinese and English