Introduction: FD-1-50 series freeze-drying machine with cold trap temperature of -50 °C, rich configuration, easy operation, compact structure and flexible combination. The main unit can be combined with different drying devices to adapt to different products. Dry, for example: stainless steel tray can be used to freeze dry bulk materials, combined with a plexiglass drying chamber with a capping device to freeze-dry the vials, and in combination with a plexiglass drying chamber with a hanging bottle, the sample in the flask can be lyophilized, and The T-frame attachment combination can be lyophilized and used for strain preservation. Features: 1. Drying chamber transparent door adopts aerospace acrylic material, no bonding, high strength and no leakage. 2. Brand compressor, stable and low noise. 3. Cold trap pre-freezing function. 4. Guide tube technology to shorten the drying cycle. 5. Special sample cold trap low temperature drying function. 6. The original imported inflation valve can be stored after drying with nitrogen or inert gas. Technical Parameters: Model: FD-1A-50 Freeze-dried area: 0.12 Cold trap temperature (no load): -55°C/-85°C Vacuum degree (no load): <9Pa Water catching capacity: 3L/4L Freeze-drying efficiency: 2L/24H Compressor power: 7/8HP Vacuum pump (domestic): 2L/S Machine size (approx.): W350*D600*H345
Introduction: FD-1-50 series freeze-drying machine with cold trap temperature of -50 °C, rich configuration, easy operation, compact structure and flexible combination. The main unit can be combined with different drying devices to adapt to different products. Dry, for example: stainless steel tray can be used to freeze dry bulk materials, combined with a plexiglass drying chamber with a capping device to freeze-dry the vials, and in combination with a plexiglass drying chamber with a hanging bottle, the sample in the flask can be lyophilized, and The T-frame attachment combination can be lyophilized and used for strain preservation.
