ET-WB microwave digestion device Introduction: The ET-WB microwave digestion device is widely applicable to the monitoring and management of water quality by environmental protection departments, water resource management departments, and public health departments at all levels. It can measure the COD values of various surface water, domestic sewage, and industrial wastewater. characteristic: 1. Save time, cost, and reduce secondary pollution. 2. LED displays temperature, time, and is accurate and intuitive, with a beep prompt indicating completion of digestion. 3. It adopts sealed digestion and has the ability to resist chloride ion interference, and can measure COD values greater than 4. Above 50mg/l, with a chloride ion content as high as 1000mg/l. 5. It can measure low COD values below 10mg/l. 6. The precision and accuracy are the same as those of the reflux method. 7. Fault self-diagnosis: Display the fault status with codes, making it convenient for users to self diagnose and repair. 8. High temperature compensation function: It can compensate for differences in digestion temperature caused by winter and summer environments, making COD measurement more accurate! 9. Equipped with a safety cover. Technical parameters: Temperature control point: automatic control Measurement range: COD cr: 5~2500 mg/L; TP：0.01~ 0.6mg/L； TN： 0.05~ 4mg/L； Resistance to chloride ion interference: ≤ 10000mg/l Sample quantity: Standard configuration: 6 (maximum of 12) Digestion tank capacity: 50ml Digestion time: 5~20min, settable Average power consumption: ≤ 1450W External dimension (mm): 485 × three hundred and ninety-three × two hundred and ninety-three
Introduction: The ET-WB microwave digestion device is widely applicable to the monitoring and management of water quality by environmental protection departments, water resource management departments, and public health departments at all levels. It can measure the COD values of various surface water, domestic sewage, and industrial wastewater.
