ET-1 microcomputer electrolytic coating thickness gauge Introduction: The ET-1 electrolytic thickness gauge has the characteristics of structure, stable and reliable performance, and complete functions. The use of this instrument can ensure the product quality of the user unit and prevent the waste of raw materials. This instrument can also help users find suitable electroplating processes for different requirements, which is related to the selection of finished products and electroplating plants. characteristic: 1. This product uses self-developed chips to process data, with high-speed serial ports, high-speed A/D, precision, compatibility, anti-interference, long lifespan, and technical front-end capabilities. 2. Switching between Chinese and English interface for LCD display, with high display quality, digital interface, small size and light weight, and low power consumption. 3. Thermal printers do not require ribbon replacement after prolonged use. Micro print interface for printing test reports in both Chinese and English, printing coating type, thickness, testing personnel, date, internal clock perpetual calendar, no need to set each time; 4. Automatically pause measurement prompt to replace electrolyte. To reduce measurement errors; 5. Automatically calculate the average value. Below 10 microns is to three decimal places with an accuracy of 1/1000; 6. Multi layer coatings such as Cr/Ni/Cu/plastic can be tested, and the report can be printed out in one go without the need for disassembly printing; 7. Using imported standard plates from the United States, calibrate and calibrate to achieve ideal measurement error values. Adjustable conductivity to reduce errors; 8. Adjust the endpoint potential difference to adapt to the appropriate potential between the coating and the substrate; 9. It can measure over 70 combinations of metal coating substrates, including coatings on flat and curved surfaces, as well as small parts, wires, and linear components; 10. The plating speed can be adjusted from 0.3-40 μ m/minute; 11. The vacuum extrusion air pump circulates and stirs, and the stirring force and air volume can be adjusted according to the coating to achieve a suitable dissolution state; 12. The electrolytic cup is made of corrosion-resistant alloy stainless steel, which is not easily corroded or aged; 13. Adjustable constant current to achieve the appropriate value of electrolysis efficiency; 14. The matrix buttons on the operation interface are intuitive and convenient for measuring operations, and input can be completed directly; 15. The matrix buttons are made of imported Omron or NKK and have a lifespan of over 10 million cycles. Technical parameters: Single layer measurement variety: nickel (0); Chromium (1); Copper (2); Zinc (3); Cadmium (4); Tin (5); Silver (6); Gold (7) and other coatings can be customized. Multilayer plating measurement: Pd Sn, Cu Zn, Zn Ni, Ni-P, etc. Measurement thickness range: 0.03~300 μ m Measurement accuracy: ± 8%+1 word Reproduction accuracy:<5%+1 word Electrolytic current accuracy: ± 1% Measuring surface diameter: Φ3.2mm； Φ2.5mm； Φ1.7mm； Four types of diameter 1.4mm Power supply: A C220 ± 10% V; 0.7A； 50HZ/60HZ±0.5HZ； Good grounding is required. choose: AC115V，100V，120V，230V，240V Usage environment: Temperature:+10~+40 ℃; Relative humidity: not exceeding 85%; There is no strong corrosive gas or magnetic field interference around Host weight: 6Kg;
Introduction: The ET-1 electrolytic thickness gauge has the characteristics of structure, stable and reliable performance, and complete functions. The use of this instrument can ensure the product quality of the user unit and prevent the waste of raw materials. This instrument can also help users find suitable electroplating processes for different requirements, which is related to the selection of finished products and electroplating plants.
