ECA-GG01 Plant Canopy Analyzer Introduction: The ECA-GG01 plant canopy analyzer can be widely used in agricultural production and scientific research. In order to conduct investigations of canopy light resources, measure the interception of light in plant canopies, and study the relationship between crop growth and development, yield and quality, and light energy utilization, this instrument is used for measuring and recording photosynthetically active radiation (PAR) in the 400nm to 700nm wavelength range. The measurement value is in micromoles per square meter • second（ μ Mols ㎡/second). The plant canopy analyzer is designed as an integrated system, including a LCD display screen, operation buttons, storage SD card, and measuring probe. The instrument menu is easy to operate, small in size, and convenient to carry. The storage medium is the commonly used SD card in the market, with large storage capacity and convenient data management! There is a reasonable power management plan in terms of power consumption. During the testing process, the instrument automatically enters standby mode according to the actual situation. When needed, press the wake-up button to wake up the screen and observe the actual data. The measurement methods are divided into automatic and manual. Technical parameters: Measurement range: 0-2700 µ mol • m-2 • s-1 Resolution: 1 µ mol • m-2 • s-1 Response time: 10 μ S Automatic collection interval: 1-99 minutes Automatic collection frequency: 1-99 times Data storage capacity: 2GB (standard SD card) Total length of instrument: 75 cm Probe length: 50 cm Number of sensors: 25 (standard) Relative difference (spectral response): ＜ 10% (for crown planting) Accuracy:<± 0.5% of measured value ± 1 word Accuracy:<± 5% of measured value ± 1 word (relative to NIM standard) Spectral response characteristics: simulating photosynthetic efficiency function Linear error:<± 0.2% of measured value ± 1 word Temperature characteristics:<± 0.1% of measured value/℃ ± 1 word Power supply: 2 No. 5 batteries
Introduction: The ECA-GG01 plant canopy analyzer can be widely used in agricultural production and scientific research. In order to conduct investigations of canopy light resources, measure the interception of light in plant canopies, and study the relationship between crop growth and development, yield and quality, and light energy utilization, this instrument is used for measuring and recording photosynthetically active radiation (PAR) in the 400nm to 700nm wavelength range. The measurement value is in micromoles per square meter • second（ μ Mols ㎡/second). The plant canopy analyzer is designed as an integrated system, including a LCD display screen, operation buttons, storage SD card, and measuring probe. The instrument menu is easy to operate, small in size, and convenient to carry. The storage medium is the commonly used SD card in the market, with large storage capacity and convenient data management! There is a reasonable power management plan in terms of power consumption. During the testing process, the instrument automatically enters standby mode according to the actual situation. When needed, press the wake-up button to wake up the screen and observe the actual data. The measurement methods are divided into automatic and manual.
