Introduction: DZF series vacuum drying oven (vacuum oven) is designed to dry heat-sensitive, easily decomposable and easily oxidized materials. It can inject inert gas into the interior. Especially, some complex components can also be quickly dried. Insulation material uses alumina fiber, high purity, shell thickened with high-quality Q235 steel spray, the instrument is equipped with a float flow meter, can pass the atmosphere, temperature control instrument using 28-stage program temperature control. Features: 1.Rectangular body studio, to maximize the effective volume, microcomputer temperature controller, accurate and reliable temperature control. 2. Toughened, bullet-proof double glass door to observe objects in the work room, at a glance 3. The door is closed and tightly adjustable, and the integrally formed silicone rubber door seal ensures high vacuum inside the box. 4. The studio is made of stainless steel (or drawing board) to ensure that the product is durable 5. Storage, heating, experimentation, and drying are performed in the absence of oxygen or in an atmosphere filled with inert gas, so no oxidation occurs. 6. The shortest heating time, the heating time is reduced by more than 50% compared with the traditional vacuum oven/vacuum oven 7. The vacuum environment greatly reduces the boiling point of the liquid that needs to be removed, so the vacuum drying oven can be easily applied to heat-sensitive substances 8. For samples that are not easy to dry, such as colloids and powder or other particulate samples, using a vacuum drying oven can effectively shorten the drying time 9. Various structurally complicated mechanical parts or other porous samples are cleaned and vacuum dried, leaving no residue after drying completely 10. Safer use, safe removal of oxides in case of heat explosion under vacuum or inert gas conditions 11. Powdered samples are not blown or moved by moving air compared to drying ovens that rely on air circulation Technical Parameters: Model: DZF-6020 Supply voltage: 220V/50HZ Input power: 1000W Temperature control range: 50-250 degrees Constant temperature fluctuation: ±1% Vacuum degree: <133PA Liner size: 300 x 300 x 275mm Dimensions: 590 x 490 x 450mm Partition: Two Studio material: stainless steel Warranty period: one year warranty period, except related consumables, such as seals and other consumables
Introduction: DZF series vacuum drying oven (vacuum oven) is designed to dry heat-sensitive, easily decomposable and easily oxidized materials. It can inject inert gas into the interior. Especially, some complex components can also be quickly dried. Insulation material uses alumina fiber, high purity, shell thickened with high-quality Q235 steel spray, the instrument is equipped with a float flow meter, can pass the atmosphere, temperature control instrument using 28-stage program temperature control.
