Introduction: This product is mainly used for direct detection of the pH value, ORP value, conductivity value, resistivity value, TDS value and temperature value of swimming pool water and tap water. There is no need to prepare a sample cup, and the sample can be directly scooped or tested, and the operation is extremely convenient. Features: 1. Test items: pH value, ORP value, conductivity value, resistivity value, TDS value, temperature 2. With the function of automatically identifying the calibration solution: 3. Automatically recognize 3 kinds of pH calibration solution groups such as GB, USA, Europe, etc. 4. Automatically identify the standard of two conductivity calibration solutions such as GB and USA 5. Support data access and storage (maximum storage capacity is 999 sets) 6. Portable design, built-in pH and conductivity measurement module, built-in electrode, can directly scoop samples or receive samples for testing, easy to operate. Technical Parameters: Instrument level: pH: 0.1 level Measurement parameters: pH value, ORP value, conductivity value, resistivity value, TDS value, temperature Measuring range: pH: (0.00～14.00)pH ORP: (-999-999)mV Conductivity: (0～200)mS/cm Resistivity: (0.01-30) MΩ TDS: (0-200)ppt Salinity: (0-200)ppt Resolution: Temperature: (0～70)℃ pH: 0.01pH ORP: 0.1mV Conductivity: 0.01μS/cm Resistivity: 0.01 KΩ TDS: 0.01ppm Salinity: 0.01ppm Temperature: 0.1℃ Basic error: pH: ±0.1pH ORP: ±10mV Conductivity: ±2%FS Resistivity: ±2%FS TDS: ±2%FS Salinity: ±2%FS
Introduction: This product is mainly used for direct detection of the pH value, ORP value, conductivity value, resistivity value, TDS value and temperature value of swimming pool water and tap water. There is no need to prepare a sample cup, and the sample can be directly scooped or tested, and the operation is extremely convenient.
