DLQ-6 series multifunctional stainless steel filter Introduction: This product consists of a stainless steel filter cup, filter head, filter bracket, collection bottle bracket, and vacuum power. This product can select different specifications and materials of filter membranes and filtrate according to the needs of the experimenters to filter different samples, such as suspended solids, nutrients, chlorophyll, bacteria, heavy metals, etc. in the samples. Suitable for all solution filtration tasks. The filter membrane and filtrate can be collected separately and tested separately without interfering with each other. One instrument can simultaneously separate and recover different samples for separate testing. Technical features: 1. Made of stainless steel with a sanitary grade or higher. 2. Easy to clean, easy to disinfect at high temperatures, acid and alkali resistant, and corrosion-resistant. 3. It can filter 2, 3, 4, 6, and 8 samples simultaneously. The filtrate and filter membrane can be collected separately and used separately. 4. The sampling range of the filter cup is large, and it can take 0-2000ml of water sample. The filter cup and filter head adopt a unique plug-in design, which makes it easy to take and place the filter membrane, making it convenient for experimental personnel to place samples 5. Filter membrane specifications (diameter): optional with a diameter of 25 Φ35、Φ45、Φ50、Φ80。 One instrument can choose to simultaneously place single diameter filter membranes or different diameter filter membranes. Each filter membrane and filtrate can be separately recovered for laboratory analysis. 6. The vacuum filtration pump adopts an oil-free dual piston design, equipped with a negative pressure gauge and adjustable negative pressure. 7. The collection bottle has a fixed frame, with rubber pads added to the four corners at the bottom to avoid collision. A water outlet is left at the bottom of the frame, with a valve for easy flushing. 8. The air circuit is designed on the outside of the rack, with valves for easy opening and closing. 9. The entire circuit has no dead corners due to water accumulation, and the valve fittings are made of high-quality 316 stainless steel materials to avoid corrosion. 10. Place the upper surface edge of the filter cup and filter head with a fence, leave a water outlet at the bottom, and have a valve for easy flushing. The overall height should be ≤ 50cm for convenient use by staff.
Introduction: This product consists of a stainless steel filter cup, filter head, filter bracket, collection bottle bracket, and vacuum power. This product can select different specifications and materials of filter membranes and filtrate according to the needs of the experimenters to filter different samples, such as suspended solids, nutrients, chlorophyll, bacteria, heavy metals, etc. in the samples. Suitable for all solution filtration tasks. The filter membrane and filtrate can be collected separately and tested separately without interfering with each other. One instrument can simultaneously separate and recover different samples for separate testing.