DHF186 Rapid Multi-element Analyzer Introduction
This instrument is based on the increase in model 85 automatic rotation into the mixing system and the sample solution, both simulated and mix by hand, but also eliminates the need for this step is time consuming and require precise control, while lifting, front and rear, left and right three-dimensional manual movement solid space automated (automated patent is declared in) this important part, making analysis speed and ease of operation has been greatly improved. Rapid analysis of bulk samples is particularly suitable. Feature
1 Sampling channels: 7
2 Measurement channels: 6.
3 Measurement stability: Changes readings ± 2 digits in 5 minutes.
4 Test Repeatability: the same sample solution was measured at 20 repetitions of reading ± 1 100% pass rate
5 Detection speed:
Start claiming an amount from about 2 hours to complete four samples of conventional SiO2, Al2O3, Fe2O3, TiO2, K2O, Na2O, CaO, MgO is measured. Determination of other elements can be completed within 4 to 6 hours. Technical Parameter
1 Measurable elements and scope
SiO2 0.01~99.9% Al2O3 0.01~99.9% Fe2O3 0.01~99.9% TiO2 0.01~99.9%
K2O 0.01~15% Na2O 0.01~15% CaO 0.01~99.9% MgO 0.01~99.9%
B2O3 0.01~30% ZrO2 0.01~99.9% Li2O 0.01~15% SnO 0.01~99.9%
PbO 0.01~99% ZnO 0.01~99.9% MnO 0.01~15% Cr2O3 0.01~15%BaO 0.01~10% NiO 0.01~99.9% CoO 0.01~99.9% P2O5 0.01~30%
MoO3 0.01~99.9% V2O5 0.01~99.9% CuO 0.01~99.9% Mo 0.01~99.9%
If you have special needs, some elements of which component content measurement limit can be extended to 0.001%.measurable species species
2.Silicon, aluminosilicate categories:
Ceramic raw materials (including glaze) and finished products, refractory raw materials and finished products, glass raw materials (including glass-ceramics) and finished products, mainly cement raw materials and finished products, as well as other inorganic non-metallic materials.
3 The following can be measured non-ferrous minerals and alloys, chemical raw materials essential components:
Chromium salt products, V2O5 product, MnO products, NiO product, titanium dioxide, phosphate, cobalt oxide, zinc oxide, boric acid, borax, barium carbonate, sodium silicate, sodium humic acid, lead, iron, molybdenum trioxide, molybdenum salt, molybdenum ore,molybdenum alloy,molybdenum,nickel alloys, nickel-cobalt-copper alloy.
3 Continuous measurement of the number of samples: 10.
4 Instrument Operating Conditions:
5 Power supply :220V 50Hz
6 Total Power 1KW
7 Ambient temperature 25 ± 5 ℃
8 Relative humidity ≤85%
Introduction
This instrument is based on the increase in model 85 automatic rotation into the mixing system and the sample solution, both simulated and mix by hand, but also eliminates the need for this step is time consuming and require precise control, while lifting, front and rear, left and right three-dimensional manual movement solid space automated (automated patent is declared in) this important part, making analysis speed and ease of operation has been greatly improved. Rapid analysis of bulk samples is particularly suitable.
