CTS6160 vehicle ultraviolet fluorescence sulfur analyzer Introduction
The CTS6160 vehicle-mounted UV fluorescent sulfur analyzer can be conveniently placed on the test vehicle and becomes a mobile analysis workstation. The CTS6160 vehicle-mounted ultraviolet fluorescence sulfur analyzer is particularly suitable for quality inspection departments and third-party inspection departments. With gas and LPG accessories, it can also be used for on-site rapid detection of natural gas and liquefied petroleum gas.
Standards compliant:
CTS6160 vehicle-mounted ultraviolet fluorescence sulfur analyzer, using the arbitration method for sulfur element detection-ultraviolet fluorescence method to determine sulfur content, in line with petrochemical industry standards and relevant countries
Home standards.
GB / T 34100——Determination of total sulfur content in light hydrocarbons and engine fuels and other oils
SH / T 0689——Determination of total sulfur content of light hydrocarbons and engine fuels and other oils (ultraviolet fluorescence method)
SH / T 11060.8——Determination of sulfur compounds in natural gas. Part 8: Determination of total sulfur content by ultraviolet fluorescence spectrophotometry Features
Shockproof
1.Instrument comes with shockproof septa
2.All parts adopt shockproof design
3.Adapt to special road conditions such as bumps and potholes
Small space volume
4.Optimized space design scheme
5.Newly designed furnace body (18.5 × 287 × 223)
6.Computer control except power switch
Method injection system
7.Fixed position fast injection
8.Voice prompt during injection
9. Analysis time 3-4min / sample
Accurate analysis results
10.Catalytic combustion guarantees complete conversion
11.Mass flowmeter accurately controls flow rate
12.High-sensitivity UV fluorescence detector
13.Comparing with the analytical data results of the laboratory Technical Parameters
Detection method: UV fluorescence method
Meet the standards: SH / T0689, GB / T34100
Combustion method: catalytic combustion
Required gas: air (generator replacement)
Injection method: manual injection
Injection volume: up to 50ul
Measurement range: 0.5-1000mg / L
Analysis time: 3-5min / sample
Standard deviation: ≤3%
Water removal method: maintenance-free membrane dryer
Anti-vibration method: whole machine anti-vibration
Weight: about 35kg
Size: 47 × 45 × 47cm
Power supply: 220 ± 10V, 50 / 60HZ, 0.8kW
Introduction
The CTS6160 vehicle-mounted UV fluorescent sulfur analyzer can be conveniently placed on the test vehicle and becomes a mobile analysis workstation. The CTS6160 vehicle-mounted ultraviolet fluorescence sulfur analyzer is particularly suitable for quality inspection departments and third-party inspection departments. With gas and LPG accessories, it can also be used for on-site rapid detection of natural gas and liquefied petroleum gas.
