Introduction: CM010 chiller is a new product developed for laboratory condensation. The equipment is small, functional, easy to use, to meet a large number of experimental equipment on the cooling water needs; is the crude fiber, fat and other detection of a good helper, the general crude fiber detection nearly 2 hours, fat detection 1 to 3 hours, in order to achieve Condensation effect, running the water through the condenser after the white flow from the sewer, fresh water for the current situation has a great waste. Fiber inspection chiller 10 liters of water permanently used, not only a large number of saving water and efficient condensation effect to solve the summer water temperature is high, poor condensation effect of solvent can not be recovered. The instrument comes with condensate circulation function, if the use of distilled water as a condensing medium, no need to clean the internal control pipeline equipment, can greatly extend its service life, while making the laboratory more beautiful and clean. Features: 1, intelligent control system, boot into the working state, temperature stability, high precision 2, ABS plastic shell, the appearance of more fashionable 3, activated carbon filter, and air conditioning the same filter effect 4, the use of distilled water recycling system, saving laboratory water, improve the life of laboratory equipment 5, imported compressor, super mute, comes with high voltage protection, running more secure 6, to provide a variety of experimental equipment, the condensation effect, the use of wheel, easy to move, single operation Technical Parameters: Temperature control accuracy: ± 1 ℃; Temperature range: 4 ~ 30 ℃; Prompt function: water shortage alarm; Circulating water: 2500L / h; Sink capacity: 10L; Voltage: 220 ~ 240V, 50Hz; Cooling capacity: 1/4 horses; Noise: <35 dB; Power: 650w; Working environment: indoor ≤ 35 ℃; Weight: 32kg;
Introduction: CM010 chiller is a new product developed for laboratory condensation. The equipment is small, functional, easy to use, to meet a large number of experimental equipment on the cooling water needs; is the crude fiber, fat and other detection of a good helper, the general crude fiber detection nearly 2 hours, fat detection 1 to 3 hours, in order to achieve Condensation effect, running the water through the condenser after the white flow from the sewer, fresh water for the current situation has a great waste. Fiber inspection chiller 10 liters of water permanently used, not only a large number of saving water and efficient condensation effect to solve the summer water temperature is high, poor condensation effect of solvent can not be recovered. The instrument comes with condensate circulation function, if the use of distilled water as a condensing medium, no need to clean the internal control pipeline equipment, can greatly extend its service life, while making the laboratory more beautiful and clean.
