CEL-FZ-A radiation meter

Product ID:GGCzhd029

Price: Please inquire PDF Format
Supply Ability:50 SETS/MON
Port:SHENZHEN
share:
  • Product Introduction
  • Consulting
  • Model NumberCEL-FZ-A
    Brand NameZHONGJIAOJINYUAN
    Payment TermsTT,PAYPAL
    CEL-FZ-A radiation meter
    Introduction:
    CEL-FZ-A radiation meter (optical power meter) is a portable automatic range test instrument. The professional photoelectric detector is adopted, and the high-precision low-power digital chip is selected. The detector has undergone strict spectral and angular characteristics correction, stable performance and strong applicability, and temperature correction is adopted to improve accuracy. It can be used to measure the irradiance of sunlight (300-1100nm), and also can be used to test the solar simulator, analog fluorescent xenon lamp, LED light source, xenon lamp, halogen lamp, monochromatic light, etc.
    characteristic:
    1. Spectral and angular characteristics are strictly corrected
    2. Digital LCD display results, including temperature correction
    3. One-button switch, automatic range switching
    4. Digital output interface (rechargeable)
    5. Lithium battery is used for power supply
    6. Measurement range 0-300mW/cm 2300-1100nm
    Technical parameters:
    Power meter: CEL-FZ-A radiation meter (optical power meter)
    Wavelength range: 300-1100nm; UV, visible, infrared, continuous measurement or segmented measurement
    Power range: 0-300.0mW/cm2; (Relative to NIM standard)
    Temperature correction range: 15-35 ; 4% cosine correction;
    Resolution: 0.1 μ w;
    Measurement error:<5%
    Normal use conditions: normal temperature 25 , normal pressure; Temperature (0~40) ; Humidity 85% RH
    Response time:<0.4 seconds
    Portable lithium battery: charging power supply: 220V, 50Hz

  • Introduction:
    CEL-FZ-A radiation meter (optical power meter) is a portable automatic range test instrument. The professional photoelectric detector is adopted, and the high-precision low-power digital chip is selected. The detector has undergone strict spectral and angular characteristics correction, stable performance and strong applicability, and temperature correction is adopted to improve accuracy. It can be used to measure the irradiance of sunlight (300-1100nm), and also can be used to test the solar simulator, analog fluorescent xenon lamp, LED light source, xenon lamp, halogen lamp, monochromatic light, etc.

     
Products
Analytical instruments
Physical property test
Environmental monitoring and analysis
Lab general equipment
About us
About this website
Our service
Product purchase
Contact Us

Newsletter

Make Sure you dont miss interesting happenings by joining our newsletter program.

Contact Us
+86-18620722006
instruments@instrumentstrade.com