Brief introduction: Name comes from the cone calorimeter used by conical heater, is Dr. Vytenis Babrauskas invented in his research, he used for small size test samples (100 ㎜ x 100 ㎜). Test of cone calorimeter theory, namely pure burning calories and necessary to the proportion of the amount of oxygen combustion, any time consumes oxygen 1 kg, 13.1 MJ's hot, and measured the thermal radiation, ignition timing, oxygen consumption, CO and CO2, and flow of hot gas from a test materials cone calorimeter is designed for laboratory use of appropriate size, the purpose is to make all the connections the DAQ (data acquisition) program is a device can run automatically, so that users can easily test. It also reduces the installation space and with 17 inch touch screen for automatic test. This tester is fully meet international standards. Technical features: 1. The integrated body and 19 inches analysis cabinet. 2. 17 inch touch screen panel PC type, for the whole control and automatic testing. 3. The cone automatically open radiation shield, make the thermal radiation transfer to the samples. 4. The British Servomex gas analyzer, accurate measurement of oxygen, carbon monoxide and carbon dioxide concentrations, accuracy of 0.02%. 5. Toxic gas gathering, equipped with heating filters and add hotline, used to measure gas. 6. Used for all gas flow MFC (mass flow controller), can improve the accuracy of flow control and automatic control of traffic. 7. Portable water cooling system, when using thermal radiation flux sensor (applicable to ISO 5660), without user running water and pipes. 8. The British force transducer to improve the precision of RS, used to measure quality loss ratio. 9. Can use PC touch screen panel control of CC 2006 DAQ program.
Brief introduction: Name comes from the cone calorimeter used by conical heater, is Dr. Vytenis Babrauskas invented in his research, he used for small size test samples (100 ㎜ x 100 ㎜). Test of cone calorimeter theory, namely pure burning calories and necessary to the proportion of the amount of oxygen combustion, any time consumes oxygen 1 kg, 13.1 MJ's hot, and measured the thermal radiation, ignition timing, oxygen consumption, CO and CO2, and flow of hot gas from a test materials
