Principle overview: This series of electric full-automatic filters, combined with the advantages of high-quality filtration and self-cleaning functions, provide continuous water supply to customers from different water sources (sewage, reservoirs, rivers, lakes, etc.). The filter can be widely used in industrial, municipal and irrigation applications. Its internal components are made of stainless steel to withstand high pollution loads and pressures. Self-cleaning will take place when the pressure difference of the filter reaches the preset value [0.5 bar (7psi)]. The strainer is fitted with a coarse strainer to prevent damage to the fine strainer by rocks and larger particles. The drain valve opens, reducing the pressure inside the backwash chamber and suction pipe to draw dirt from the suction nozzle to the dirt collector and discharge it from there through the drain valve. At the same time, the motor rotates dirt collector along its axis. The combination of vertical motion and rotation ensures that the suction nozzle can cover the entire mesh for effective cleaning. The whole process takes 15-20 seconds. Basic features: Inlet/outlet parallel (horizontal layout). Filter shell material: carbon steel. The filter is antisepsis by polyester or epoxy powder electrostatic coating, thickness of 150-200 m (micron) and drying oven. The filters are fitted with a stainless steel strainer mesh that meets the requirements of different precision: 50-3000 m (micron). The connection mode of the port/outlet can be: 1. Quick connector connector (to ensure its flexibility and easy assembly) 2, flange 3. Internal thread [diameter up to 4" Maximum working pressure: up to 10 bar. Minimum operating pressure: 1bar. Maximum water temperature: 65 centic. Pressure loss of cleaning filter: 0.1bar. Control voltage: 380 V, 3 phase, 0.5HP. Control system: PLC electronic control board. It has the function of time cleaning (preset by the operator) to ensure that the flushing will be carried out automatically when the pressure loss does not reach the preset value. Special application: Maximum working pressure: 16,25,40 bar. The highest working temperature: 95 ° C. Frost protection: special control system for cold weather. Voltage :110V, 220, single-phase, 3, 24v and solar energy. Material available: sst-304,316,904, duplex stainless steel and titanium alloy. Available controller: electronics, timer, air drive, computer and custom Settings. The filter is vertically connected to a strainless screen and the inlet and outlet shafts are 90 degrees. Filter vertical connection - inlet shaft and outlet shaft are 180 degrees, with or without coarse strainer Adjustable nozzle with filtering accuracy below 50 microns.
Principle overview: This series of electric full-automatic filters, combined with the advantages of high-quality filtration and self-cleaning functions, provide continuous water supply to customers from different water sources (sewage, reservoirs, rivers, lakes, etc.). The filter can be widely used in industrial, municipal and irrigation applications. Its internal components are made of stainless steel to withstand high pollution loads and pressures. Self-cleaning will take place when the pressure difference of the filter reaches the preset value [0.5 bar (7psi)]. The strainer is fitted with a coarse strainer to prevent damage to the fine strainer by rocks and larger particles. The drain valve opens, reducing the pressure inside the backwash chamber and suction pipe to draw dirt from the suction nozzle to the dirt collector and discharge it from there through the drain valve. At the same time, the motor rotates dirt collector along its axis. The combination of vertical motion and rotation ensures that the suction nozzle can cover the entire mesh for effective cleaning. The whole process takes 15-20 seconds.
