Principle overview:
This series of automatic water moving filter combines the advantages of high quality filtration and self-cleaning function to provide continuous water supply from different water sources (sewage, reservoirs, rivers, lakes, etc.). The filter can be widely used in industrial, municipal and irrigation applications. The main component is a stainless steel mesh with a large open area to withstand high pollution loads and pressures. Self-cleaning will be carried out when the pressure difference of the filter reaches the preset value [0.5 bar (7psi)]. The filter is fitted with a coarse mesh to prevent fine mesh from being damaged by rocks and larger particles. The drain valve opens, the pressure is released through the hydraulic plug, and the water is discharged through the drain valve. The pressure inside the hydraulic motor chamber and the suction pipe is greatly reduced. The hydraulic motor drives the suction pipe and the suction nozzle to rotate and move horizontally, and the dirt is sucked out through the suction nozzle to clean the inner wall of the entire filter screen.
The flushing process takes 10 seconds. At the end of the process, the drain valve is closed and the filter is clean. Basic features:
1. Inlet/outlet is parallel.
2. Filter enclosure material: carbon steel.
3. The antisepsis of the filter is made by electrostatic coating of polyester or epoxy powder, with thickness of 150-200 m (micron) and curing by oven.
4. The filter is equipped with a stainless steel strainer, which can meet the requirements of different precision: 50-3000m (micron).
5. Maximum working pressure: 10 bar;
Minimum operating pressure: 2bar.
6. Maximum working temperature: 65 centic.
7. Pressure loss of cleaning filter: 0.1bar.
8. Control voltage: 9 V, 12V dc voltage, 24 V ac voltage.
9. It has the function of time cleaning (preset by the operator) to ensure that the flushing will be carried out automatically when the pressure loss does not reach the preset value. Special application:
Maximum working pressure: 16,25,40 bar
The highest working temperature: 95 ℃
Frost protection: special control system for cold weather.
Voltage :110,220V, single phase, 3 phase, 24V and solar energy.
Material available: sst-304,316,904, duplex stainless steel, titanium.
Available controllers: electronics, timer, air drive, computer and custom Settings.
Principle overview:
This series of automatic water moving filter combines the advantages of high quality filtration and self-cleaning function to provide continuous water supply from different water sources (sewage, reservoirs, rivers, lakes, etc.). The filter can be widely used in industrial, municipal and irrigation applications. The main component is a stainless steel mesh with a large open area to withstand high pollution loads and pressures. Self-cleaning will be carried out when the pressure difference of the filter reaches the preset value [0.5 bar (7psi)]. The filter is fitted with a coarse mesh to prevent fine mesh from being damaged by rocks and larger particles. The drain valve opens, the pressure is released through the hydraulic plug, and the water is discharged through the drain valve. The pressure inside the hydraulic motor chamber and the suction pipe is greatly reduced. The hydraulic motor drives the suction pipe and the suction nozzle to rotate and move horizontally, and the dirt is sucked out through the suction nozzle to clean the inner wall of the entire filter screen.
The flushing process takes 10 seconds. At the end of the process, the drain valve is closed and the filter is clean.
