CA-G24A soil drying oven Introduction: The CA-G24A soil drying oven adopts a dual mode of drying oven module heating and hot air to simulate the indoor air flow mode, that is, the air drying mode for soil drying. Dry air is clean hot air that has been roughly filtered and adsorbed by activated carbon. The samples are stored and dried separately in separate rooms, which is clean and avoids cross contamination of the samples; Time saving; Effortless; Save space; Improving soil drying efficiency and other characteristics. Applicable to the following standards regarding sample air drying requirements: GB/T 32722-2016 "Guidelines for Long term and Short term Storage of Soil Quality Soil Samples", HJ/T 166-2004 "Technical Specifications for Soil Environmental Monitoring", NY/T 1121.1-2006 "Soil Testing Part 1: Collection, Treatment and Storage of Soil Samples", HJ/T 20-1998 "Technical Specifications for Sampling and Sample Preparation of Industrial Solid Waste" Features: 1. Using air disturbance technology, dual air sources simulate indoor air flow, which is largely close to the indoor environment and achieves the goal of rapid air drying. 2. Advanced air filtration and adsorption technology was sampled, and a total exhaust guide port (which can be connected to an external exhaust pipe) was installed to prevent secondary cross contamination of the sample. 3. The heating block material of the drying oven is imported infrared ceramic heating, which is uniformly heated and has a long service life. 4. The sample box is an independent sample room, which separates the samples to prevent cross contamination. 5. The sample chamber is made of stainless steel material to avoid chemical corrosion and organic matter adsorption; Easy to clean. 6. The sample room is equipped with a transparent observation room, which facilitates customers to observe the status of the samples at any time. 7. The sample room can be equipped with enamel trays, stainless steel trays, etc. It can directly place ordinary soil samples or high moisture content samples such as river sediment. 8. Each sample room is equipped with an independent heating module, which significantly improves the constant temperature range and accuracy of each sample room, effectively improves the uniformity of temperature control, and there is no interference between adjacent sample rooms. 9. 7-inch large LCD touch screen, convenient and easy to operate. 10. The air source room is placed in a drying oven, and the entire machine inside the drying oven is soundproof, which has the advantages of low noise, small footprint, simple operation, and easy maintenance. 11. Each sample box can be independently controlled for temperature and constant temperature. 12. Equipped with two high-power ultra quiet air purification pumps, which can accelerate air circulation. 13. The sample room has a large space, which can accommodate five kilograms of samples for easy drying. 14. The exhaust gas can be collected uniformly and discharged outdoors through pipelines. 15. The bottom of the soil drying oven is equipped with rollers for easy movement. Technical parameter: Power supply voltage: 220V, 50Hz; Power: 1600W Dry air temperature range: room temperature -60 ℃ * 24, temperature control accuracy ± 1 ℃ (digital adjustable) Number of sample rooms: 24. Working environment: temperature 20-40 ℃; Relative humidity of 10% to 80%; Drying room temperature 40 ℃ with air purification device Sample room size (mm): 360 * 260 * 180 (length x width x height) Instrument size (mm): 1380 * 500 * 1680 (length x width x height) Control mode: 24 independent sample chambers are individually controlled by 24 sets of temperature sensors and control tables.
Introduction: The CA-G24A soil drying oven adopts a dual mode of drying oven module heating and hot air to simulate the indoor air flow mode, that is, the air drying mode for soil drying. Dry air is clean hot air that has been roughly filtered and adsorbed by activated carbon. The samples are stored and dried separately in separate rooms, which is clean and avoids cross contamination of the samples; Time saving; Effortless; Save space; Improving soil drying efficiency and other characteristics. Applicable to the following standards regarding sample air drying requirements: GB/T 32722-2016 "Guidelines for Long term and Short term Storage of Soil Quality Soil Samples", HJ/T 166-2004 "Technical Specifications for Soil Environmental Monitoring", NY/T 1121.1-2006 "Soil Testing Part 1: Collection, Treatment and Storage of Soil Samples", HJ/T 20-1998 "Technical Specifications for Sampling and Sample Preparation of Industrial Solid Waste"
