C013-20 sealed all quartz photoelectrochemical cell
Technical features: 1. The cell body is polished with quartz, which is transparent on all sides and refuses to stick 2. The transmittance of quartz in the cell is above 95% 3. The cover of the cell is peek 4. The matching electrode of the electrolytic cell, reference silver silver chloride electrode (diameter 3.0 mm), platinum wire electrode diameter 0.5 mm, working electrode platinum mesh electrode (6 * 7 mm) 5. The working electrode of the electrolytic cell can also be replaced with glass carbon or gold plate with a diameter of 3mm 6. The crack size of the cell is 8 * 6.5 * 1mm 7. The electrolytic cell is a square cell with a size of 12 * 12mm 8. The quartz sealing part of the electrolytic cell is designed with external screw port, and the inner core is made of PEEK material with 360 degree rotation 9. Make the electrode accurately correspond to the crack, and seal it by tightening the PEEK material outer cover 10. The sealing of the electrode part of the electrolytic cell is realized on the polytetrafluoroethylene plug, and the sealing effect is achieved by squeezing O-ring with sealing screw
Technical features: 1. The cell body is polished with quartz, which is transparent on all sides and refuses to stick 2. The transmittance of quartz in the cell is above 95% 3. The cover of the cell is peek 4. The matching electrode of the electrolytic cell, reference silver silver chloride electrode (diameter 3.0 mm), platinum wire electrode diameter 0.5 mm, working electrode platinum mesh electrode (6 * 7 mm) 5. The working electrode of the electrolytic cell can also be replaced with glass carbon or gold plate with a diameter of 3mm 6. The crack size of the cell is 8 * 6.5 * 1mm 7. The electrolytic cell is a square cell with a size of 12 * 12mm 8. The quartz sealing part of the electrolytic cell is designed with external screw port, and the inner core is made of PEEK material with 360 degree rotation 9. Make the electrode accurately correspond to the crack, and seal it by tightening the PEEK material outer cover 10. The sealing of the electrode part of the electrolytic cell is realized on the polytetrafluoroethylene plug, and the sealing effect is achieved by squeezing O-ring with sealing screw
