C007-10 2H replaceable membrane electrolytic cell Technical features: Pool body material: high borosilicate glass The electrodes of the electrolytic cell can be matched according to the needs, and all the electrodes must be extended The single-layer cell body of the electrolytic cell has an overhead layer design, which effectively eliminates solution hiding This electrolytic cell is often used in a three-electrode system, and the volume of the electrolytic cell is 10ml The electrolytic cell is divided into two electrolytic cell systems, relative sealing and Jedi sealing. The cathode chamber and the anode chamber are separated by ion membrane. The two chambers are sealed and linked by a chain to facilitate the replacement of the diaphragm. The reference electrode and the working electrode are in the same chamber, which effectively reduces the R drop. . The glass sealing part of the electrolytic cell adopts an internal threaded port design, and the sealing effect is achieved by tightening the PTFE and extruding the sealing ring. The electrode part of the electrolytic cell is sealed by the sealing screw squeezing the O ring The absolute sealing of the electrode part of the electrolytic cell is achieved through the earphone jack on the polytetrafluoroethylene cover, so that the electrode system is absolutely sealed. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and the atmosphere is different according to the experiment The electrolytic cell can not add valves, all absolute sealing is achieved through quick connection, the diameter of the PTFE tube used for quick connection is 3mm
Technical features: Pool body material: high borosilicate glass The electrodes of the electrolytic cell can be matched according to the needs, and all the electrodes must be extended The single-layer cell body of the electrolytic cell has an overhead layer design, which effectively eliminates solution hiding This electrolytic cell is often used in a three-electrode system, and the volume of the electrolytic cell is 10ml The electrolytic cell is divided into two electrolytic cell systems, relative sealing and Jedi sealing. The cathode chamber and the anode chamber are separated by ion membrane. The two chambers are sealed and linked by a chain to facilitate the replacement of the diaphragm. The reference electrode and the working electrode are in the same chamber, which effectively reduces the R drop. . The glass sealing part of the electrolytic cell adopts an internal threaded port design, and the sealing effect is achieved by tightening the PTFE and extruding the sealing ring. The electrode part of the electrolytic cell is sealed by the sealing screw squeezing the O ring The absolute sealing of the electrode part of the electrolytic cell is achieved through the earphone jack on the polytetrafluoroethylene cover, so that the electrode system is absolutely sealed. The electrolytic cell is equipped with an aeration device that can ventilate under the liquid surface, and the atmosphere is different according to the experiment The electrolytic cell can not add valves, all absolute sealing is achieved through quick connection, the diameter of the PTFE tube used for quick connection is 3mm
