- Model NumberBTQ-413
- Brand NameHFBLSCKDZKJ
- Payment TermsT/T, paypal
Brief introduction:
Btq-413 strain torque sensor is produced by our company through structural optimization and technical improvement on the basis of traditional torque sensor. This product volume is more exquisite, the installation is more convenient, sets up the product for the customer to save the very big space, the power supply and the measurement signal all USES the non-contact transmission way, is suitable for the long time use, the low abrasion, the free maintenance.
Product features:
The internal use of non-contact wireless transmission torque signal output
It has the advantages of good stability, high precision, good reliability and long service life
Dynamic torque and static torque can be detected
The measurement of torque signal output and rotation speed is independent of whether the rotation and steering
The zero does not need to adjust repeatedly can continuously measure the positive and negative torque signal
Digital signal technology, strong anti - interference
No collector ring and so on wear, high speed can run for a long time
Technical parameters:
1. The measuring range: 0 - plus or minus 5. + 10. + 20. + 50. + / - 100 + 200 + / - 500-1000. 0 + 2000 + 50000 + 10000. + 20000.. + 30000 + 50000 + 60000 + 100000. 0 + 150000 + 200000 + 250000... + 300000
2. Output signal: 5-15khz 0 + / - 5V 4-20ma
3. Working speed: 0-30000 RPM (optional at any speed)
4. Power supply voltage: 24VDC and + / - 15VDC are optional
5. Response frequency: 100 microns
6. The environment temperature: - 40-60 ℃
7. Maximum load: 1.5 times of the range
8. Insulation resistance: > 200 m Ω
9. Zero drift: < 0.5%
10. Precision: 0.1, 0.25, 0.5
11. Repeatability: < 0.1% linearity: < 0.1%s lag: < 0.1%
12. Relative humidity: < 90%RH
