BLJ-01 Disk Stripping Tester Suitable for gravure printing process to produce plastic film and cellophane and decorating printed with the printing ink fastness test trials . Also attached to the state test trials for vacuum coating, surface coating, composite and other related processes of formation of the surface layer . Working principle Will choose according to the standard provisions of the glass paper tape and the samples after printing ink test environment adjustment after the surface, with a standard load, rolling speed and rolling times together, place the regulation of a certain time, and then to the pressure and speed of stripping certain they will peel, observation and measurement of sample ink layer is stripped of the situation, in order to judge analysis on the combining fastness of printing ink layer. Technical characteristics 1.the microcomputer control, simple operation 2.the end of the test automatic alarm main parameters Pressure of 100N disc Stripping speed 0.8m/s Dimensions of 290mm * 240mm * 390mm (length and width and height) The weight of 20kg The working power supply of 220V 50HZ
BLJ-01 Disk Stripping Tester Suitable for gravure printing process to produce plastic film and cellophane and decorating printed with the printing ink fastness test trials . Also attached to the state test trials for vacuum coating, surface coating, composite and other related processes of formation of the surface layer .