Introduction: BKLS series chillers can be divided into water-cooled chillers and air-cooled chillers according to cooling (heat dissipation) or cooling medium. Widely used in plastic products production, electronic product manufacturing, machining, casting, packaging and printing, purification processing, ultrasonic cleaning, bio-pharmaceutical, chemical, scientific research, food production, aquaculture, electroplating, laser processing, powder metallurgy and other fields. The water-cooled chiller requires an additional cooling tower, which is cooled by the cooling tower water circulation, that is, the hot cooling water discharged from the condenser is cooled by the cooling tower. Due to the external cooling tower, it is necessary to clean the cooling tower and pipeline regularly. In winter, it should be prevented from freezing. However, the cooling effect is better than the BOKE air-cooling series. It is more common in the summer and the high temperature in the south, and the noise is very suitable. Production and test environments with noise requirements. Technical Parameters: Model: BKLS-S130Q Rated cooling capacity: 37kW 32000kcal/h Compressor form: fully enclosed scroll Cooling input power: 11.5kW Cooling running current: 19A Condenser type: shell-and-tube heat exchanger Inlet and outlet pipe interface size: DN40 Water flow: 15m3/h Evaporator type: stainless steel plate heat exchanger Inlet and outlet pipe interface size: DN50 Water flow: 8m3/h Throttle mode: external balance thermal expansion valve Water tank capacity: 120L Pump power: 0.75kW Safety devices: high and low, low pressure, anti-ice, overload, owing phase, reverse phase, water flow protection, etc. Temperature control mode: Electronic temperature automatic control Temperature control range: 5 ~ 35 °C Dimensions: length, width and height 1500 X 750 X 1200 mm Voltage: 380V/50HZ
Introduction: BKLS series chillers can be divided into water-cooled chillers and air-cooled chillers according to cooling (heat dissipation) or cooling medium. Widely used in plastic products production, electronic product manufacturing, machining, casting, packaging and printing, purification processing, ultrasonic cleaning, bio-pharmaceutical, chemical, scientific research, food production, aquaculture, electroplating, laser processing, powder metallurgy and other fields. The water-cooled chiller requires an additional cooling tower, which is cooled by the cooling tower water circulation, that is, the hot cooling water discharged from the condenser is cooled by the cooling tower. Due to the external cooling tower, it is necessary to clean the cooling tower and pipeline regularly. In winter, it should be prevented from freezing. However, the cooling effect is better than the BOKE air-cooling series. It is more common in the summer and the high temperature in the south, and the noise is very suitable. Production and test environments with noise requirements.
