Features: 1. It adopts Panasonic compressor, built-in safety protection, low noise, energy saving and durability, to increase the service life of the equipment. 2. The air-cooled condenser adopts the honeycomb finned string high-efficiency internal thread copper tube and the high efficiency outer rotor fan, and the heat exchange effect is very good. 3. Microcomputer temperature automatic control. Faults such as reverse phase, compressor high pressure, compressor low pressure, compressor overload, pump overload, cooling water flow overheating, and chilled water temperature are all displayed on the panel. The panel displays the temperature setpoint and the current temperature value. Beautiful appearance and convenient setting. Precise control of temperature (5 ° C ~ 35 ° C), temperature control accuracy ± 0.5 ° C, up to ± 0.1 ° C. For other temperature ranges, it can be customized as required. 4. Adopt Schneider Electric products from Germany, with perfect electrical protection system, such as lack/phase protection, ultra high/low voltage protection, overheat/overcurrent protection, antifreeze protection, water cutoff protection, etc. 5. The unit adopts humanized design, which has sufficient cooling capacity, small volume, reasonable structure, beautiful appearance and convenient operation. 6. Perfect electrical protection system, built-in compressor overload protection, cold water pump overload protection, system high and low pressure abnormal protection, ice water antifreeze flow protection, start delay protection, reverse phase, phase loss, over and under voltage protection, etc. Device. Technical Parameters: Chiller model: BKLS-2F70Q Compressor rated kW: 4.66 Rated cooling capacity kW: 13 Unit cooling method: air cooling Power supply : 3φ/380V/50HZ The maximum power of the whole machine kW: 7.63 Compressor form: fully enclosed scroll Evaporator form: coil immersed Condenser form: High efficiency finned heat exchanger Condenser heat exchange area m2: 49 Condensing fan air volume m3/h: 2×3800 Condensing fan power kW: 2×0.2 Refrigerant throttling mode: externally balanced thermal expansion valve Temperature adjustment range °C: 15~45 Water (oil) temperature control accuracy °C: ±1 Refrigerant: R22 Unit control mode: Microcomputer temperature automatic control Panel indications: Exhaust pressure, suction pressure, water temperature Unit size mm: 1800×700×1200 Interface size: PT1 outer teeth
Features: 1. It adopts Panasonic compressor, built-in safety protection, low noise, energy saving and durability, to increase the service life of the equipment. 2. The air-cooled condenser adopts the honeycomb finned string high-efficiency internal thread copper tube and the high efficiency outer rotor fan, and the heat exchange effect is very good. 3. Microcomputer temperature automatic control. Faults such as reverse phase, compressor high pressure, compressor low pressure, compressor overload, pump overload, cooling water flow overheating, and chilled water temperature are all displayed on the panel. The panel displays the temperature setpoint and the current temperature value. Beautiful appearance and convenient setting. Precise control of temperature (5 ° C ~ 35 ° C), temperature control accuracy ± 0.5 ° C, up to ± 0.1 ° C. For other temperature ranges, it can be customized as required. 4. Adopt Schneider Electric products from Germany, with perfect electrical protection system, such as lack/phase protection, ultra high/low voltage protection, overheat/overcurrent protection, antifreeze protection, water cutoff protection, etc. 5. The unit adopts humanized design, which has sufficient cooling capacity, small volume, reasonable structure, beautiful appearance and convenient operation. 6. Perfect electrical protection system, built-in compressor overload protection, cold water pump overload protection, system high and low pressure abnormal protection, ice water antifreeze flow protection, start delay protection, reverse phase, phase loss, over and under voltage protection, etc. Device.
