BJGJ-3 sterilizer Introduction: Our company's sterilizer is jointly developed with a certain university to achieve real-time collection of particulate matter in the air and sterilization of microorganisms. Using cyclone method, particles in the atmosphere are separated by cyclone and collected into storage bottles. The storage bottles contain sterilized liquid to eliminate bacteria, viruses and other microorganisms collected. Sample and enrich liquid for easy replacement, and sample components for easy replacement. Built in UV disinfection and sterilization module to prevent secondary pollution of exhaust gas. Compared to existing air purifiers, the usage cost is low, the collection liquid can be replaced by tap water, and daily maintenance is simple and convenient. It can quickly and effectively remove particulate pollutants from indoor air, avoiding the potential threat of secondary pollution during the treatment process. In addition, the product is equipped with remote control function, which facilitates operation from any location and improves the convenience of life. After the purification work is completed, simply twist off the storage bottle to dispose of the liquid inside, greatly saving time and energy. characteristic: 1. The cyclone tube concentrates aerosols and then impacts the collection liquid, resulting in a high flow rate, 2. Dry wall cyclones require less liquid collection, 3. Negative pressure sampling, the sampling gas path components can be fully disassembled, replaced, and cleaned, effectively preventing cross contamination from multiple samplings; 4. The instrument is lightweight and portable, and can be used for handheld sampling; 5. Touch screen operation, easy to operate; 6. Strong environmental applicability, use wearable protective clothing for operation. Technical parameters: Volume: 150 * 200 * 350mm Weight: 2.95kg Flow rate: 400L/min Voltage: 12V Power: 90W Working temperature: 0-60 ℃ Working humidity: 0-80% Sampling bottle: 25ml sampling bottle Sampling solution: 3-4ml Noise: 80 decibels (one meter distance) Battery running time: continuous for 3 hours Sampling liquid evaporation rate: about 50ul/min (ambient temperature: 20 ℃, humidity: 20%)
Introduction: Our company's sterilizer is jointly developed with a certain university to achieve real-time collection of particulate matter in the air and sterilization of microorganisms. Using cyclone method, particles in the atmosphere are separated by cyclone and collected into storage bottles. The storage bottles contain sterilized liquid to eliminate bacteria, viruses and other microorganisms collected. Sample and enrich liquid for easy replacement, and sample components for easy replacement. Built in UV disinfection and sterilization module to prevent secondary pollution of exhaust gas. Compared to existing air purifiers, the usage cost is low, the collection liquid can be replaced by tap water, and daily maintenance is simple and convenient. It can quickly and effectively remove particulate pollutants from indoor air, avoiding the potential threat of secondary pollution during the treatment process. In addition, the product is equipped with remote control function, which facilitates operation from any location and improves the convenience of life. After the purification work is completed, simply twist off the storage bottle to dispose of the liquid inside, greatly saving time and energy.
