BEE-6100L Ion Flow Nitrogen Analyzer Introduction: BEE-6100L is a highly cost-effective high-precision online nitrogen analyzer designed and produced from advanced ion flow oxygen sensors, high-performance ARM microprocessors, and other carefully selected components. Advanced production technology ensures excellent quality and performance. N2% display (N2%=100-O2%), which is particularly suitable for accurate measurement of nitrogen concentration in nitrogen and oxygen mixed gases. characteristic: 1. Have a high cost performance ratio; 4 digit high brightness digital tube display with large viewing angle and long distance; 3. The ion flow oxygen sensor is adopted, with accurate measurement, fast response speed, and long service life; 4.85~264VAC wide range power supply voltage, suitable for any region in the world, and internally equipped with protection measures against short circuit and overcurrent; 5. Small and delicate, it is the smallest nitrogen analysis product on the market, with built-in sensors. Technical parameters: Product model: BEE-6100L Product Name: Ion Flow Nitrogen Analyzer Sensor: Ion flow oxygen sensor Measuring range: 79~99.9% Vol N2 Display: 4-bit high brightness digital tube Display resolution: 0.01% Repeatability: ≤± 2.5% F.S Measurement accuracy: ≤± 1% F.S Stability: ≤± 1% F.S/1 week Response time: T90 ≤ 20 seconds Measurement method: gas inlet type Calibration cycle: 1 year (recommended) Warranty period: 12 months Working voltage: 85-264VAC Power frequency: 50Hz Overall power consumption: ≤ 6W Opening size: 69 * 69mm Square hole: air inlet Φ 6 * 4 quick tightening Operating Weight: About 380g Ambient temperature: - 50~20 ℃ Ambient humidity: ≤ 90% RH Inlet pressure: ≤ 20kPa (normal pressure) Outlet pressure: close to atmospheric pressure External air pipe: 6 * 4mm PTFE pipe Sample gas flow rate: 1-1.5L/min (recommended 1.2L/min) Sample gas requirements: no liquid water, no particles, no oil gas, no corrosive gas, no combustible gas.
Introduction: BEE-6100L is a highly cost-effective high-precision online nitrogen analyzer designed and produced from advanced ion flow oxygen sensors, high-performance ARM microprocessors, and other carefully selected components. Advanced production technology ensures excellent quality and performance. N2% display (N2%=100-O2%), which is particularly suitable for accurate measurement of nitrogen concentration in nitrogen and oxygen mixed gases.
