ATS-500 Silicon Steel Insulation Resistance Tester Introduction: The ATS-500 silicon steel sheet insulation resistance tester can automatically measure the insulation resistance of electrical steel sheet (strip) coatings. The equipment consists of main functional components such as a stabilized power supply unit, a precision current measurement unit, a control processing unit, and a testing platform (equipped with 10 contacts, metal rods, drill bits, and electric pressure control units). Users only need to input testing conditions, record parameters, and place samples to automatically complete the test. The equipment complies with standards such as GB/T 2522-2017 Test Method for Insulation Resistance and Adhesion of Electrical Steel Sheet (Strip) Coating, IEC660404-11:2012. Users can customize automatic loading and unloading detection versions, as well as heating detection versions (with heating units up to 150 ℃). characteristic: 1. Measurement range of insulation resistance coefficient of electrical steel sheet (strip) coating: ≥ 1.5 Ω mm2 2. The equipment can be used for quality control of insulation coatings on electrical steel sheets (samples, stamping sheets) 3. Optional computer and upper computer software can be used to achieve measurement and data management. Technical parameters: 1. Voltage stabilizing power supply unit Output voltage: DC: 0~500mV Output current: DC: 0-1.2A Accuracy of current and voltage: better than 0.1% 2. Test bench unit 10 conductive contact areas: 645 mm2 ± 0.5% Contact pressure range: 0.01-5N/mm2 Pressure accuracy: better than 0.5% Pressure during measurement: 2N/mm ² One measurement time: less than 20 seconds 3. Requirements for measuring samples Size: (30mm-110mm) * (110mm-500mm) Thickness: 0.1mm-1.0mm Other: The surface of the sample should be clean, flat, free of blemishes and scratches 4. Overall mechanical parameters of the equipment Peripheral dimensions: 460mm (W) * 400mm (D) * 980mm (H) Weight: 65Kg
Introduction: The ATS-500 silicon steel sheet insulation resistance tester can automatically measure the insulation resistance of electrical steel sheet (strip) coatings. The equipment consists of main functional components such as a stabilized power supply unit, a precision current measurement unit, a control processing unit, and a testing platform (equipped with 10 contacts, metal rods, drill bits, and electric pressure control units). Users only need to input testing conditions, record parameters, and place samples to automatically complete the test. The equipment complies with standards such as GB/T 2522-2017 Test Method for Insulation Resistance and Adhesion of Electrical Steel Sheet (Strip) Coating, IEC660404-11:2012. Users can customize automatic loading and unloading detection versions, as well as heating detection versions (with heating units up to 150 ℃).
