Introduction: The ASW3010 radar water level gauge antenna emits a very narrow microwave pulse. When it encounters the surface of the measured medium, part of its energy is reflected back and received by the same antenna. The time interval between the transmitted pulse and the received pulse is proportional to the distance from the antenna to the surface of the measured medium. . ASW3010 radar water level gauge is mainly used for water conservancy and hydrological monitoring in rivers, lakes, reservoirs, open channels, tidal water levels, etc. Features: 1. Measuring range up to 70 meters, can be used for large reservoir measurement 2. Pulse working mode, low transmission power, no harm to human body and environment 3. High measurement accuracy and high reliability 4. Provide a variety of output interfaces, adapt to the acquisition device 5. Strong anti-interference ability, not affected by noise, steam, dust, vacuum and other working conditions 6. Small size, light weight, easy to install Technical indicators Measuring range: 30 meters or 70 meters Power requirements: (6 ~ 24) VDC Power consumption: Max.12mA Signal output: RS485/Modbus, optional (4~20) mA Mechanical connection: Thread G11⁄2? A / bracket / flange Working pressure: atmospheric pressure, Max.4MPa Working temperature: (-40～100)°C Accuracy: ±3mm Frequency range: 26GHz Protection level: IP67
Introduction: The ASW3010 radar water level gauge antenna emits a very narrow microwave pulse. When it encounters the surface of the measured medium, part of its energy is reflected back and received by the same antenna. The time interval between the transmitted pulse and the received pulse is proportional to the distance from the antenna to the surface of the measured medium. . ASW3010 radar water level gauge is mainly used for water conservancy and hydrological monitoring in rivers, lakes, reservoirs, open channels, tidal water levels, etc.
