Brief introduction: Walk-in constant temperature and humidity laboratory used in the defense industry, aerospace industry, automation components, auto parts, electronic parts, plastic, chemical industry, pharmaceutical industry and related products of heat, cold test, for the industry to provide large parts, semi-finished products, finished products of the large temperature and humidity test environment space, suitable for testing the product quantity many, large volume of test equipment. Technical indicators: 1. The temperature ranges: - 40 ℃ ~ 85 ℃. 2. The temperature fluctuation degree, plus or minus 0.5 ℃. 3. The temperature uniformity: plus or minus 2.0 ℃. 4. The heating time: from 70 ℃ to 70 ℃ is less than 120 minutes when load (nonlinear). 5. The cooling time: by + 20 ℃ to 40 ℃ (nonlinear no-load) is less than 70 minutes. Does the temperature change rate for air temperature change rate, rather than the product temperature change rate. 6. Scope of humidity: 20% ~ 98% r.h.; Please refer to the graph of temperature and humidity. 7. Humidity, volatility: plus or minus 2.5% r.h.. 8. Humidity uniformity: plus or minus 5.0% r.h..
Brief introduction: Walk-in constant temperature and humidity laboratory used in the defense industry, aerospace industry, automation components, auto parts, electronic parts, plastic, chemical industry, pharmaceutical industry and related products of heat, cold test, for the industry to provide large parts, semi-finished products, finished products of the large temperature and humidity test environ
