Sales ALL-CKMD400 type crystal rod reference surface finder，Manufacturer

1 Sales ALL-CKMD400 type crystal rod reference surface finder，Manufacturer

User Login
EN /

Select Your Language / Currency Language / Currency

Language

English عربي Deutsch Français Español Русский Português қазақ

Currency

USD US

Save
+86-18620722006
instruments@instrumentstrade.com

Position: Home > > Analytical instruments > X-ray instrument > X ray diffraction > ALL-CKMD400 type crystal rod reference surface finder

ALL-CKMD400 type crystal rod reference surface finder

Product ID：FXys0014

Price: Please inquire PDF Format

Supply Ability:20SETS/MON

Port:SHENZHEN

share:

Product Introduction
Consulting

Model NumberALL-CKMD400
Brand NameYIMA
Payment TermsT/T, paypal

Features:
⑴ measurement crystal stick fixture structure and function of introduction:
Reference platform: This piece is fixed on the console panel of the host. The horizontal reference plane is to be measured. The right side of the reference platform is the positioning surface. The left side is the clamping device. The left side clamping device is provided with the clamping screw. The fixtures were placed on the reference platform during the measurement.
⑵ measurement plane: crystal main reference surface orientation: measurable ingot diameter of 2,4,6 inches, the surface of theta angle: 18.917 ° (18 ° 55'00 ") (or according to customer needs to do C , R direction).
① instrument calibration: with standard crystal rod calibration equipment. Θ angle of crystal orientation to : 18.917 ° (18 ° 55'00 ")
② The fixture with the crystal stick, clean up and put on the instrument reference platform, adjust the front and rear position, so that the X-ray can be irradiated to the outer cylindrical surface of the crystal rod, rotate the left side of the reference platform clamping screw, the tight . Open the X-ray shutter, so that the rod to be measured in the fixture slowly rotate to find the peak. When the μA needle for the best state (that is, when the maximum), to ensure the crystal rod does not move, the crystal rod clamp.
③ remove the fixture from the orientation instrument, go to the grinder grinding plane.
④ automatic lifting test.
Technical Parameters:
Input Power: Single-phase AC 220V, 50Hz, 0.25kW.
X-ray tube: copper target, fan cooling, anode grounded.
The maximum tube voltage and current: 30kV, 5mA continuously adjustable, using 2.0mA above,
It is possible to damage the X-ray tube and increase the radiation hazard.
Detector: Counter. Operating voltage up to DC1000V; or flashing detector,
Operating voltage up to DC1200V.
Time constant: 1 (fast), 2 (slow) two files.
Angle of measurement: θ = 18.917 ° (18 ° 55'00 ")
Main Shutter: Automatic.
Dashboard: ray intensity meter.
Overall dimensions: 1132 (L) × 642 (W) × 1460 (H) mm
Weight: 200kg

Features:
⑴ measurement crystal stick fixture structure and function of introduction:
Reference platform: This piece is fixed on the console panel of the host. The horizontal reference plane is to be measured. The right side of the reference platform is the positioning surface. The left side is the clamping device. The left side clamping device is provided with the clamping screw. The fixtures were placed on the reference platform during the measurement.
⑵ measurement plane: crystal main reference surface orientation: measurable ingot diameter of 2,4,6 inches, the surface of theta angle: 18.917 ° (18 ° 55'00 ") (or according to customer needs to do C , R direction).
① instrument calibration: with standard crystal rod calibration equipment. Θ angle of crystal orientation to : 18.917 ° (18 ° 55'00 ")
② The fixture with the crystal stick, clean up and put on the instrument reference platform, adjust the front and rear position, so that the X-ray can be irradiated to the outer cylindrical surface of the crystal rod, rotate the left side of the reference platform clamping screw, the tight . Open the X-ray shutter, so that the rod to be measured in the fixture slowly rotate to find the peak. When the μA needle for the best state (that is, when the maximum), to ensure the crystal rod does not move, the crystal rod clamp.
③ remove the fixture from the orientation instrument, go to the grinder grinding plane.
④ automatic lifting test.

Products: Analytical instruments; Physical property test; Environmental monitoring and analysis; Lab general equipment

About us: About this website; Our service; Product purchase; Contact Us

Contact Us: +86-18620722006; instruments@instrumentstrade.com

Copyright © 2017-2024 instrumentstrade.com All rights reserved. Powered By UeeShop