Introduction: Designed for materials research and industrial product analysis, the AL Series analyzers are perfect products that combine routine analysis with special purpose measurement. Polycrystalline powder analyzer can analyze natural or synthetic inorganic or organic materials, widely used in clay minerals, cement building materials, environmental dust, chemical products, pharmaceuticals, asbestos, rock and mineral, polymer and other fields of research. Features: A perfect combination of hardware and software systems to meet the needs of scholars, researchers in different applications 2 high-precision diffraction angle measurement system for more accurate measurement results 3 high stability generator control system, get more stable repeat measurement accuracy 4 program operation, integrated structure design, easy to operate, the appearance of the instrument more beautiful Polycrystalline powder analyzer is a versatile test instrument that reveals crystal structure and chemical information of materials: Identify one or more of 5 unknown samples 6 Known phase quantitative analysis in mixed samples 7 crystal structure analysis 8 unconventional changes in crystal structure (high temperature, low temperature conditions) 9 material surface membrane analysis Metal texture, stress analysis Technical Parameters: Model AL-Y3000 Calibration power 4kW Tube voltage 10-60kV Tube current 5-80mA X-ray tube glass tube, ceramic tube, corrugated ceramic tube: Cu, Fe, Co, Cr, Mo and other power 2kW metal ceramic tube: 2.4kW The focal spot size is 1 × 10 mm or 0.4 × 14 mm or 2 × 12 mm Goniometer structure Horizontal (θ-2θ) Diffraction circle radius of 185mm Scan range 0-164 Scanning speed 0.0012 ° -70 ° min Angle positioning speed 1500 ° -min Scanning θ-2θ linkage, θ, 2θ single-action; continuous or step scan Angle repeatability 5/10000 ° Minimum step angle 1/10000 ° Detector proportional (PC) or flashing (SC) Maximum linear count rate of 5 × 105CPS (with leakage count compensation function) Energy resolution ≤25% (PC), ≤50% (SC) Differential counting method or integration, automatic PHA, dead time correction System measurement stability ≤ 0.01% Scattered dose ≤ 1μSv / h (X-ray protective device outside) Instrument stability ≤ 0.5% Dimensions 1000 × 800 × 1600mm
Introduction: Designed for materials research and industrial product analysis, the AL Series analyzers are perfect products that combine routine analysis with special purpose measurement. Polycrystalline powder analyzer can analyze natural or synthetic inorganic or organic materials, widely used in clay minerals, cement building materials, environmental dust, chemical products, pharmaceuticals, asbestos, rock and mineral, polymer and other fields of research.
