Introduction: Used to determine cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate/nitrite, hexavalent in surface water, groundwater, drinking water and environmental water Chromium and other ingredients. Features: -Fully automatic multi-channel analysis, the software workstation supports up to 8 channels of simultaneous detection, easy and quick to change the analysis method; the entire analysis process is automatically completed without manual intervention; -Peristaltic pump: 12-channel integral gland type peristaltic pump, pump speed can be set by program, 5-100 revolutions per minute; -Autosampler: The polar coordinate autosampler is equipped with 162 sample tube positions, needle washing positions, and two large-capacity washing liquid levels to meet the needs of large sample volume analysis; -Long-life LED light source, the use time can reach tens of thousands of hours. High-sensitivity blue-enhanced photoelectric detector, wavelength detection range 340nm-1050nm; -High-precision A/D converter, the detection dynamic range is not less than 3 orders of magnitude; -Diluter: It can automatically prepare calibration curve samples and online dilute over-standard samples with a dilution factor of 1.5-10000 times; -Reagent dosage: according to different methods, ranging from 10ug to 100ug; -Analysis frequency: each method is different, the fastest is 120 samples/hour. technical parameter Linear range: 0.01 -2mg/L (calculated by P); MDL: <0.005 mg/L (calculated by P); Sample analysis frequency: 30 samples/hour; Precision: <1.0%; Remarks: Technical indicators will vary due to different substances tested.
Introduction: Used to determine cyanide, volatile phenol, anionic surfactant, ammonia nitrogen, chemical oxygen demand, sulfide, total phosphorus, total nitrogen, nitrate/nitrite, hexavalent in surface water, groundwater, drinking water and environmental water Chromium and other ingredients.
