AISIRUI-DL touch screen micro drop tester Introduction: This machine is suitable for repeated drop test of small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3, CD, and electronic dictionaries. Design principle The lifting cylinder drives the upper clamp (air finger) to lower and clamp the mobile phone. When the air finger is released, the mobile phone moves freely. At this time, the double-acting cylinder expands and retracts the mobile phone to the position where the upper clamp can hold it. The upper clamp (air finger) is lowered to clamp the mobile phone, and it is raised. The air finger is opened, and the mobile phone moves freely. This is repeated until the set number of times. Features: Can set the number of times to automatically stop falling surface material: aluminum, thickness is 12mm. The drop position uses six reset cylinders. Prompt function: It can set the fixed value of the number of keys, and can automatically stop the test. This machine adopts Japanese SMC rodless cylinder as the driving source for mobile phone lifting and falling, and is equipped with a precision double-acting cylinder for homing action, durable use; it can achieve repeated drops of mobile phones and other products to detect the impact resistance of the product falling from a certain height; Due to the use of pneumatic components and an authoritative control method, the test speed and consistency are greatly improved; the Japanese Panasonic LCD touch-screen control panel + PLC programmable controller is used for program control; independent counting, and the test is automatically stopped when the set number of times is reached Technical Parameters: Drop mobile phones at the same time: 1/2 Allowable test piece weight: 2kg (max) Drop height: 60-150mm Test speed range: 6 to 20 times / min PLC controller and touch screen: 1 set Machine size: W420 * H950 * D370mm Machine weight: about 40kg Air source: ≥0.5Mpa10, power source: AC 220V or specified Remarks: The electrical part and main body of the production part are integrated. 5. The main configuration 1. Touch screen: 1 PLC: 1 2. Ascending and descending cylinders: 1 set / 2 sets (SMC) 3. Clamping propulsion cylinders: 2/4 (SMC) 4. Mechanical fingers: 2/4 (SMC)
This machine is suitable for repeated drop test of small electronic consumer products such as mobile phones, telephone handsets, walkie-talkies, MP3, CD, and electronic dictionaries. Design principle The lifting cylinder drives the upper clamp (air finger) to lower and clamp the mobile phone. When the air finger is released, the mobile phone moves freely. At this time, the double-acting cylinder expands and retracts the mobile phone to the position where the upper clamp can hold it. The upper clamp (air finger) is lowered to clamp the mobile phone, and it is raised. The air finger is opened, and the mobile phone moves freely. This is repeated until the set number of times.
