Introduction: ADOX-300 Deoxygenation Nitrogen Generator is a kind of advanced technology of absorbing foreign nitrogen and nitrogen by our Company. Nitrogen production is achieved by using carbon molecular sieve to adsorb oxygen molecules and nitrogen molecules. Adopting intelligent frequency vacuum desorption technology, the regeneration capacity of carbon molecular sieve Get an unprecedented increase. The nitrogen generator is not only in the conditions of high oxygen concentration with a strong ability to deoxygenation of nitrogen, but also at low oxygen concentrations also have a good ability of deoxygenation of nitrogen by virtue of Kaifu unique control technology after deoxygenation of nitrogen The nitrogen purity can reach more than 97%, even up to 99.5%. Wufu deoxygenation nitrogen machine with a manual deoxygenation nitrogen and automatic deoxygenation nitrogen function. When manual operation is needed, set the manual working time on the touch screen to automatically stop when the working time expires; set the stop value and start value of the deoxygenating oxygen concentration when working automatically, when the oxygen concentration is higher than the start value, the device will automatically Start the work, when the oxygen concentration dropped to the stop value, the device automatically stop working. Equipment with oxygen zero and standard point test function, also available zero and air calibration, your device deoxygenation (nitrogen) more accurate. ADOX-300 deoxygenation machine brings a new experience of nitrogen production to customers in the field of nitrogen production. It has high nitrogen efficiency, low operation cost, rich functions and easy operation. Compared with the PSA nitrogen generator, it does not require a large power compressor, small footprint. Power consumption is 1 / 3-1 / 2 of the PSA nitrogen generator. The figure below shows the comparison between nitrogen and electricity consumption of the machine made of fufurodendron and PSA. Wufu Fu nitrogen machine is a fruit and vegetable air conditioning in the PSA nitrogen generator and hollow fiber nitrogen generator the most ideal alternative equipment.
Introduction: ADOX-300 Deoxygenation Nitrogen Generator is a kind of advanced technology of absorbing foreign nitrogen and nitrogen by our Company. Nitrogen production is achieved by using carbon molecular sieve to adsorb oxygen molecules and nitrogen molecules. Adopting intelligent frequency vacuum desorption technology, the regeneration capacity of carbon molecular sieve Get an unprecedented increase. The nitrogen generator is not only in the conditions of high oxygen concentration with a strong ability to deoxygenation of nitrogen, but also at low oxygen concentrations also have a good ability of deoxygenation of nitrogen by virtue of Kaifu unique control technology after deoxygenation of nitrogen The nitrogen purity can reach more than 97%, even up to 99.5%. Wufu deoxygenation nitrogen machine with a manual deoxygenation nitrogen and automatic deoxygenation nitrogen function. When manual operation is needed, set the manual working time on the touch screen to automatically stop when the working time expires; set the stop value and start value of the deoxygenating oxygen concentration when working automatically, when the oxygen concentration is higher than the start value, the device will automatically Start the work, when the oxygen concentration dropped to the stop value, the device automatically stop working. Equipment with oxygen zero and standard point test function, also available zero and air calibration, your device deoxygenation (nitrogen) more accurate.